Melrose soil
Wild-clay potential
Strong lead
Strong lead: a clayey layer typically about 23 to 65 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Melrose soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Melrose spot on the map
Rated from the USDA soil survey record for Melrose fine sandy loam, 0 to 3 percent slopes (Addison County, Vermont) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 45% clay in the fine-earth portion.
- Raises the potential High engineering plasticity index (20.5): USDA's estimate suggests plastic behavior when wet.
- Note Thick enough to investigate (about 42 in (107 cm)).
- Note Typically starts within about 23 in (58 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- Sandy layerH1 A fine sandy loam layer about 0 to 7 in down: about 8% clay, low plasticity when wet, very dark grayish brown when moist. Weak indication
- Sandy layerH2 A fine sandy loam layer about 7 to 23 in down: about 8% clay, low plasticity when wet. Weak indication
- Clay-rich layerH3best layer A clay layer about 23 to 65 in down: about 45% clay, high plasticity when wet, olive when moist. Strong lead
What it looks like raw
The clay-rich layer (H3), 23 to 65 in down in the typical profile: olive (5Y 4/3). Raw colour is not fired colour.
About the soil
- Parent material: coarse-loamy glaciolacustrine deposits over clayey glaciolacustrine deposits.
- USDA family mineralogy: mixed.
- USDA family particle-size class: coarse-loamy over clayey.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 6 map units in Maine, Vermont, in these survey areas: Addison County, Vermont; Somerset County, Maine, Southern Part.
By state: wild clay in Maine,wild clay in Vermont.
USDA, distribution and extent: Maine, Massachusetts, Connecticut, New York, and Vermont.(MLRA's 142, 143, 144A, 144B, 145) The soils is of moderate extent.
USDA, geographic setting: Melrose soils are on glaciolacustrine, marine or outwash plains and deltas. Slope ranges from 0 to 50 percent but is dominantly 2 to 20 percent. The soils formed in loamy outwash or lacustrine materials underlain by fine-textured lacustrine or marine deposits. The climate is humid and cool temperate. Mean annual temperature ranges from 43 to 46 degrees F, and the mean annual precipitation ranges from 40 to 48 inches. The frost-free season ranges from 90 to 160 days. Elevation ranges from 5 to 900 feet above mean sea level.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Biddeford: Strong lead
- Buxton: Strong lead
- Covington: Strong lead
- Lamoine: Strong lead
- Livingston: Strong lead
- Scantic: Strong lead
- Suffield: Strong lead
- Swanton: Strong lead
See it on the map
Open a Melrose spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Melrose fine sandy loam, 0 to 3 percent slopes, map unit MrA in Addison County, Vermont.
- Official Series Description: Melrose(revised 01/2000), established.
- Taxonomic class: Coarse-loamy over clayey, mixed over illitic, superactive, frigid Oxyaquic Dystrudepts
- Rated with rule version 2026-09-28.1; the method is on the About page.