Shanks soil
Wild-clay potential
Weak indication
Weak indication: no layer of Shanks shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Shanks soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Shanks-Borid-Schiller complex, 25 to 65 percent slopes (Ada County, Idaho) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 25% clay. It may need settling or refining to become a clay body.
- Note USDA labels this a "Bt" horizon: a subsoil layer where clay has accumulated.
- Note Moderate engineering plasticity index (17).
- Note The official series description calls the wet soil slightly sticky and slightly plastic.
- Note Thick enough to investigate (about 23 in (58 cm)).
- Note Typically starts within about 13 in (33 cm) of the surface.
- Lowers the potential High rock content (about 55% by volume) lowers its practical promise; the clay percentage applies only to the fine earth between the rocks.
Layer by layer
- TopsoilA A gravelly coarse sandy loam layer about 0 to 6 in down: about 12% clay, moderate plasticity when wet, grayish brown when moist. Weak indication
- TopsoilAB A gravelly coarse sandy loam layer about 6 to 13 in down: about 14% clay, moderate plasticity when wet, brown when moist. Weak indication
- Clay subsoilBtbest layer A very gravelly sandy clay loam layer about 13 to 36 in down: about 25% clay, moderate plasticity when wet, light yellowish brown when moist. Weak indication
- BedrockR Bedrock about 36 to 46 in down: no clay layer to dig. Weak indication
What it looks like raw
The clay subsoil (Bt), 13 to 36 in down in the typical profile: light yellowish brown (10YR 6/4), dark yellowish brown (10YR 4/4) moist; hard, firm, slightly sticky and slightly plastic. Raw colour is not fired colour.
About the soil
- Parent material: colluvium derived from granodiorite over granodiorite.
- USDA family mineralogy: mixed.
- USDA family particle-size class: loamy-skeletal.
- Drainage: well drained.
- Lithic bedrock typically about 36 in (91 cm) down.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Idaho, in these survey areas: Ada County, Idaho.
By state: wild clay in Idaho.
USDA, distribution and extent: West-central Idaho. MLRA 10. Shanks soils are not extensive.
USDA, geographic setting: Shanks soils are on canyon walls and hill backslopes at elevations of 3,000 to 5,000 feet. Slopes range from 25 to 90 percent. These soils formed in colluvium and residuum from granitic rocks. The average annual precipitation is 14 to 20 inches. The average annual temperature is 45 to 50 degrees F. The frost-free period is 90 to 140 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Aldape: Strong lead
- Aradaran: Strong lead
- Bowns: Strong lead
- Breadloaf: Strong lead
- Brent: Strong lead
- Castlerock: Strong lead
- Catchell: Strong lead
- Chardoton: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 40%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Shanks-Borid-Schiller complex, 25 to 65 percent slopes, map unit 5036 in Ada County, Idaho.
- Official Series Description: Shanks(revised 07/2012), established.
- Taxonomic class: Loamy-skeletal, mixed, superactive, mesic Ultic Argixerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.