Shadoval soil
Wild-clay potential
Strong lead
Strong lead: a clay-enriched layer typically about 4 to 10 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Shadoval soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Shadoval spot on the map
Rated from the USDA soil survey record for Shadoval-Polecat complex, 4 to 15 percent slopes (Ada County, Idaho) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 51% clay in the fine-earth portion.
- Note USDA labels this a "Btn" horizon: a subsoil layer where clay has accumulated.
- Raises the potential High engineering plasticity index (38): USDA's estimate suggests plastic behavior when wet.
- Raises the potential The official series description calls the wet soil very sticky and very plastic (a field observation, not a ceramic test).
- Note Moderate thickness (about 6 in (15 cm)).
- Note Typically starts within about 4 in (10 cm) of the surface.
- Note Few rock fragments (about 0% by volume).
- Note High shrink-swell (linear extensibility about 11.2%): often very plastic, and prone to cracking as it dries.
- Note Engineering class CH: a clay of high plasticity in the Unified system.
Layer by layer
- TopsoilA A silt loam layer about 0 to 2 in down: about 19% clay, moderate plasticity when wet, grayish brown when moist. Weak indication
- Loamy layerBA A clay loam layer about 2 to 4 in down: about 30% clay, high plasticity when wet, grayish brown when moist. Possible
- Clay subsoilBtnbest layer A clay layer about 4 to 10 in down: about 51% clay, high plasticity when wet, dark grayish brown when moist. Strong lead
- Clay subsoilBtkn A silty clay loam layer about 10 to 15 in down: about 30% clay, high plasticity when wet, yellowish brown when moist. Possible
- Loamy layerBkn A silty clay loam layer about 15 to 20 in down: about 30% clay, high plasticity when wet, pale brown when moist. Possible
- Loamy layerBkny1 A silt loam layer about 20 to 32 in down: about 18% clay, moderate plasticity when wet, very pale brown when moist. Possible
- Sandy layerBkny2 A silt loam layer about 32 to 39 in down: about 13% clay, moderate plasticity when wet, very pale brown when moist. Weak indication
- BedrockCrky Bedrock about 39 to 49 in down: no clay layer to dig. Weak indication
What it looks like raw
The clay subsoil (Btn), 4 to 10 in down in the typical profile: dark grayish brown (10YR 4/2), very dark brown (10YR 2/2) moist; extremely hard, firm, very sticky and very plastic. Raw colour is not fired colour.
About the soil
- Parent material: silty alluvium and/or residuum over silty lacustrine deposits.
- USDA family mineralogy: smectitic. Smectite-rich clays are usually very plastic and shrink a lot as they dry.
- USDA family particle-size class: fine.
- Drainage: well drained.
- Paralithic bedrock typically about 39 in (99 cm) down.
Where it is mapped
Seen on the map as the most common soil in 3 map units in Idaho, in these survey areas: Ada County, Idaho.
By state: wild clay in Idaho.
USDA, distribution and extent: Ada County, Idaho. MLRA 10. The soils are of limited extent.
USDA, geographic setting: Shadoval soils are on hill backslopes and summits and have slopes of 4 to 50 percent. The soils formed in colluvium and residuum from lacustrine deposits. The elevation ranges from 2,700 to 3,300 feet. The average annual precipitation is 12 to 15 inches and average annual temperature is 50 to 52 degrees F. The frost-free period is 140 to 155 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Aldape: Strong lead
- Aradaran: Strong lead
- Bowns: Strong lead
- Breadloaf: Strong lead
- Brent: Strong lead
- Castlerock: Strong lead
- Catchell: Strong lead
- Chardoton: Strong lead
See it on the map
Open a Shadoval spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 60%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Shadoval-Polecat complex, 4 to 15 percent slopes, map unit 3012 in Ada County, Idaho.
- Official Series Description: Shadoval(revised 07/2012), established.
- Taxonomic class: Fine, smectitic, mesic Vertic Natrixerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.