Sensabaugh soil
Wild-clay potential
Weak indication
Weak indication: no layer of Sensabaugh shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Sensabaugh soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Sensabaugh spot on the map
Rated from the USDA soil survey record for Sensabaugh loam, 0 to 3 percent slopes, occasionally flooded (Cabell County, West Virginia) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 21% clay. It may need settling or refining to become a clay body.
- Note Moderate engineering plasticity index (13).
- Note Thick enough to investigate (about 35 in (89 cm)).
- Note Typically starts about 30 in (76 cm) down; expect real digging or look for cuts and banks.
- Lowers the potential High rock content (about 40% by volume) lowers its practical promise; the clay percentage applies only to the fine earth between the rocks.
Layer by layer
- TopsoilAp A loam layer about 0 to 7 in down: about 16% clay, moderate plasticity when wet, brown when moist. Weak indication
- Loamy layerBw A channery loam layer about 7 to 26 in down: about 25% clay, moderate plasticity when wet, brown when moist. Weak indication
- Loamy layerBC A channery loam layer about 26 to 30 in down: about 24% clay, moderate plasticity when wet, brown when moist. Weak indication
- Loamy layerCbest layer A very channery loam layer about 30 to 65 in down: about 21% clay, moderate plasticity when wet, dark yellowish brown when moist. Weak indication
What it looks like raw
The loamy layer (C), 30 to 65 in down in the typical profile: dark yellowish brown (10YR 4/4); gravelly loam. Raw colour is not fired colour.
About the soil
- Parent material: fine-loamy alluvium derived from sedimentary rock.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 2 map units in West Virginia, in these survey areas: Cabell County, West Virginia.
By state: wild clay in West Virginia.
USDA, distribution and extent: The great Appalachian Valley and Ridge province in Tennessee, mainly in the Allegheny Plateau area of West Virginia and possibly in Kentucky and Virginia. The series is of small extent.
USDA, geographic setting: Sensabaugh soils are in narrow tracts along intermittent drainageways and small streams and on local alluvial fans at the mouth of hollows. Slopes range have from 0 to 10 percent slopes. The soil formed in loamy local alluvium washed from soils underlain by shales, sandstone, and limestone. Near the type location, mean annual temperature is about 57 degrees F, and mean annual rainfall is 43 inches.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Vandalia: Strong lead
- Guyan: Promising
- Allegheny: Possible
- Chagrin: Possible
- Cotaco: Possible
- Dormont: Possible
- Gilpin: Possible
- Kanawha: Possible
See it on the map
Open a Sensabaugh spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 80%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Sensabaugh loam, 0 to 3 percent slopes, occasionally flooded, map unit SoA in Cabell County, West Virginia.
- Official Series Description: Sensabaugh(revised 04/2001), established.
- Taxonomic class: Fine-loamy, mixed, semiactive, mesic Dystric Fluventic Eutrudepts
- Rated with rule version 2026-09-28.1; the method is on the About page.