Russett soil
Wild-clay potential
Promising
Promising: a clay-enriched layer typically about 26 to 46 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Russett soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Russett spot on the map
Rated from the USDA soil survey record for Russett fine sandy loam, 0 to 5 percent slopes (Harford County Area, Maryland) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 30% clay in the fine-earth portion.
- Note USDA labels this a "Bt3" horizon: a subsoil layer where clay has accumulated.
- Note Moderate engineering plasticity index (18).
- Raises the potential The official series description calls the wet soil nonsticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 20 in (51 cm)).
- Note Typically starts about 26 in (66 cm) down; expect real digging or look for cuts and banks.
- Note Few rock fragments (about 3% by volume).
Layer by layer
- TopsoilA A fine sandy loam layer about 0 to 4 in down: about 5% clay, low plasticity when wet, very dark gray when moist. Weak indication
- Clay subsoilBt1 A loam layer about 4 to 13 in down: about 14% clay, moderate plasticity when wet, yellowish brown when moist. Weak indication
- Clay subsoilBt2 A loam layer about 13 to 26 in down: about 25% clay, moderate plasticity when wet, yellowish brown when moist. Weak indication
- Clay subsoilBt3best layer A silty clay loam layer about 26 to 46 in down: about 30% clay, moderate plasticity when wet, yellowish brown when moist. Promising
- Loamy layerBCg A sandy clay loam layer about 46 to 57 in down: about 22% clay, moderate plasticity when wet, percent light gray when moist. Possible
- Loamy layerCg A silty clay loam layer about 57 to 80 in down: about 31% clay, moderate plasticity when wet, grayish brown when moist. Possible
What it looks like raw
The clay subsoil (Bt3), 26 to 46 in down in the typical profile: yellowish brown (10YR 5/8); sandy clay loam; friable; nonsticky; moderately plastic. Raw colour is not fired colour.
About the soil
- Parent material: loamy fluviomarine deposits.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: moderately well drained.
Where it is mapped
Seen on the map as the most common soil in 14 map units in Maryland, in these survey areas: Baltimore County, Maryland; Cecil County, Maryland; Harford County Area, Maryland; Prince George's County, Maryland.
By state: wild clay in Maryland.
USDA, distribution and extent: Distribution: Maryland, and possibly the District of Columbia, Delaware and New Jersey
USDA, geographic setting: Landscape: Northern Mid-Atlantic Coastal Plain
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Christiana: Strong lead
- Montalto: Strong lead
- Watchung: Strong lead
- Lenni: Strong lead
- Benevola: Strong lead
- Cumberstone: Strong lead
- Howell: Strong lead
- Jackland: Strong lead
See it on the map
Open a Russett spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 80%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Russett fine sandy loam, 0 to 5 percent slopes, map unit RuB in Harford County Area, Maryland.
- Official Series Description: Russett(revised 12/2007), established.
- Taxonomic class: Fine-loamy, mixed, semiactive, mesic Aquic Hapludults
- Rated with rule version 2026-09-28.1; the method is on the About page.