Riverpoint soil
Wild-clay potential
Possible
Possible: a clay-enriched layer typically about 11 to 14 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Riverpoint soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Riverpoint spot on the map
Rated from the USDA soil survey record for Riverpoint-Hellake complex, 2 to 25 percent slopes (Boise County Area, Idaho, Western Part) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 28% clay in the fine-earth portion.
- Note USDA labels this a "Bt1" horizon: a subsoil layer where clay has accumulated.
- Note Moderate engineering plasticity index (15).
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Lowers the potential Thin layer (about 3 in (8 cm)), hard to collect in quantity.
- Note Typically starts within about 11 in (28 cm) of the surface.
- Note Few rock fragments (about 10% by volume).
Layer by layer
- TopsoilA A loam layer about 0 to 6 in down: about 21% clay, moderate plasticity when wet, brown when moist. Weak indication
- TopsoilAB A loam layer about 6 to 11 in down: about 23% clay, moderate plasticity when wet, brown when moist. Weak indication
- Clay subsoilBt1best layer A clay loam layer about 11 to 14 in down: about 28% clay, moderate plasticity when wet, pale brown when moist. Possible
- Clay subsoilBt2 A very gravelly clay loam layer about 14 to 19 in down: about 29% clay, moderate plasticity when wet, light yellowish brown when moist. Weak indication
- Clay subsoil2Bt3 A very gravelly coarse sandy loam layer about 19 to 31 in down: about 10% clay, low plasticity when wet, light yellowish brown when moist. Weak indication
- Sandy layer2CBt A very gravelly coarse sandy loam layer about 31 to 41 in down: about 6% clay, low plasticity when wet, light yellowish brown when moist. Weak indication
- Sandy layer2C An extremely gravelly loamy coarse sand layer about 41 to 60 in down: about 3% clay, low plasticity when wet, brownish yellow when moist. Weak indication
What it looks like raw
The clay subsoil (Bt1), 11 to 14 in down in the typical profile: pale brown (10YR 6/3), brown (10YR 4/3) moist; hard, firm, moderately sticky and moderately plastic. Raw colour is not fired colour.
About the soil
- Parent material: gravelly alluvium.
- USDA family mineralogy: mixed.
- USDA family particle-size class: loamy-skeletal.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Idaho, in these survey areas: Boise County Area, Idaho, Western Part.
By state: wild clay in Idaho.
USDA, distribution and extent: West-central Idaho. MLRA 44. Riverpoint soils are of small extent.
USDA, geographic setting: Riverpoint soils are gently sloping to moderately steep on shoulders and risers of relict lakebed terraces and convex areas of fan remnants at elevations of 2,950 to 3,900 feet. These soils formed in alluvium from igneous rocks (dominantly granodiorite) mixed with lacustrine sediments in the upper part. Slopes range from 2 to 25 percent. Average annual precipitation is 20 to 26 inches. Average annual temperature is 45 to 48 degrees F. Frost-free period is 90 to 120 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Aradaran: Strong lead
- Hann: Strong lead
- McDesh: Strong lead
- Shafer: Strong lead
- Hellake: Promising
- Hillcreek: Promising
- Middlefork: Promising
- Brownlee: Possible
See it on the map
Open a Riverpoint spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 55%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Riverpoint-Hellake complex, 2 to 25 percent slopes, map unit 404 in Boise County Area, Idaho, Western Part.
- Official Series Description: Riverpoint(revised 03/2007), established.
- Taxonomic class: Loamy-skeletal, mixed, superactive, mesic Ultic Argixerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.