Quincy soil
Wild-clay potential
Weak indication
Weak indication: no layer of Quincy shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Quincy soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Quincy loamy fine sand, 0 to 15 percent slopes (Chelan County Area, Washington (Parts of Chelan and Kittitas Counties)) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Too little clay to be a clay body on its own: about 4% clay.
- Lowers the potential Low engineering plasticity index (0): little plastic behavior expected when wet.
- Note Thick enough to investigate (about 50 in (127 cm)).
- Note Typically starts within about 10 in (25 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- Sandy layerH1 A loamy fine sand layer about 0 to 10 in down: about 4% clay, low plasticity when wet, grayish brown when moist. Weak indication
- Sandy layerH2best layer A fine sand layer about 10 to 60 in down: about 4% clay, low plasticity when wet, grayish brown when moist. Weak indication
What it looks like raw
The sandy layer (H2), 10 to 60 in down in the typical profile: grayish brown (10YR 5/2), dark brown (10YR 3/3) moist; loose. Raw colour is not fired colour.
About the soil
- Parent material: eolian sands.
- USDA family mineralogy: mixed.
- USDA family particle-size class: not used.
- Drainage: somewhat excessively drained.
Where it is mapped
Seen on the map as the most common soil in 11 map units in Idaho, Washington, in these survey areas: Ada County, Idaho; Canyon Area, Idaho; Chelan County Area, Washington (Parts of Chelan and Kittitas Counties); Douglas County, Washington.
By state: wild clay in Idaho,wild clay in Washington.
USDA, distribution and extent: Washington MLRA 7, Oregon MLRA 7 and 11, Idaho MLRA 11, and California. The soil is extensive.
USDA, geographic setting: Quincy soils are on uplands, fan piedmonts and terraces, some having a ridged, hummocky, or dune microrelief. Slopes range from 0 to 65 percent. Many of the low rounded ridges are narrow and long. These soils formed in sands from mixed sources, but contains significant amounts of dark colored basaltic sand. Elevations are 150 to 2,800 feet in Washington and north-central Oregon, and 2,500 to 4,500 feet elsewhere. The climate is arid or semiarid and summers are dry. The mean annual precipitation is 6 to 12 inches. The mean annual air temperature is 47 to 53 degrees F. The frost-free season is 130 to 200 days in Washington and north-central Oregon, and 100 to 150 days elsewhere.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Aldape: Strong lead
- Aradaran: Strong lead
- Bowns: Strong lead
- Breadloaf: Strong lead
- Brent: Strong lead
- Castlerock: Strong lead
- Catchell: Strong lead
- Chardoton: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 100%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Quincy loamy fine sand, 0 to 15 percent slopes, map unit QuC in Chelan County Area, Washington (Parts of Chelan and Kittitas Counties).
- Official Series Description: Quincy(revised 11/2008), established.
- Taxonomic class: Mixed, mesic Xeric Torripsamments
- Rated with rule version 2026-09-28.1; the method is on the About page.