Preston soil
Wild-clay potential
Weak indication
Weak indication: no layer of Preston shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Preston soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Preston spot on the map
Rated from the USDA soil survey record for Preston fine sand, 1 to 10 percent slopes (Davis-Weber Area, Utah) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Too little clay to be a clay body on its own: about 3% clay.
- Lowers the potential Low engineering plasticity index (0): little plastic behavior expected when wet.
- Note Thick enough to investigate (about 28 in (71 cm)).
- Note Typically starts within about 20 in (51 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- TopsoilA1 A fine sand layer about 0 to 7 in down: about 4% clay, low plasticity when wet, dark grayish brown when moist. Weak indication
- TopsoilAC A fine sand layer about 7 to 20 in down: about 4% clay, low plasticity when wet, brown when moist. Weak indication
- Sandy layerC1best layer A fine sand layer about 20 to 48 in down: about 3% clay, low plasticity when wet, yellowish brown when moist. Weak indication
- Sandy layerC2 A fine sand layer about 48 to 65 in down: about 3% clay, low plasticity when wet, yellowish brown when moist. Weak indication
What it looks like raw
The sandy layer (C1), 20 to 48 in down in the typical profile: yellowish brown (10YR 5/4), dark yellowish brown (10YR 4/4) moist; loose. Raw colour is not fired colour.
About the soil
- Parent material: eolian deposits.
- USDA family mineralogy: siliceous.
- USDA family particle-size class: not used.
- Drainage: excessively drained.
Where it is mapped
Seen on the map as the most common soil in 3 map units in Utah, in these survey areas: Davis-Weber Area, Utah.
By state: wild clay in Utah.
USDA, distribution and extent: Central and northern Utah and southern Idaho. The soil is of moderate extent. MLRA 13 and 28A.
USDA, geographic setting: Preston soils formed on undulating to rolling, nearly level to steep sand dunes, deposited on lake terraces and terrace escarpments. Slopes range from 0 to 60 percent. Dunes ranging in height from about 3 to 6 feet are common. The climate is dry subhumid. The mean annual air temperature ranges from 46 F. to 52 degrees F., the average summer temperature ranges from 65 F. to 73 degrees F., and the frost free season ranges from 120 to 175 days. The average annual precipitation ranges from 12 to 19 inches. Elevation is 4300 to 6200 feet.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Abbott: Strong lead
- Airport: Strong lead
- Eimarsh: Strong lead
- Kirkham: Strong lead
- Payson: Strong lead
- Pintailake: Strong lead
- Saltair: Strong lead
- Woods Cross: Strong lead
See it on the map
Open a Preston spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 100%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Preston fine sand, 1 to 10 percent slopes, map unit PxB in Davis-Weber Area, Utah.
- Official Series Description: Preston, established.
- Taxonomic class: Mixed, mesic Typic Xeropsamments
- Rated with rule version 2026-09-28.1; the method is on the About page.