Power soil
Wild-clay potential
Possible
Possible: a surface layer with some clay typically about 0 to 9 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Power soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Power silt loam, 0 to 1 percent slopes (Canyon Area, Idaho) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 20% clay. It may need settling or refining to become a clay body.
- Note Moderate engineering plasticity index (13).
- Note The official series description calls the wet soil slightly sticky and slightly plastic.
- Note Moderate thickness (about 9 in (23 cm)).
- Note Typically starts within about 0 in (0 cm) of the surface.
- Missing data Rock fragment content is not reported.
- Note Surface layer; expect roots and organic matter.
Layer by layer
- TopsoilApbest layer A silt loam layer about 0 to 9 in down: about 20% clay, moderate plasticity when wet, light brownish gray when moist. Possible
- Clay subsoilBtk A silt loam layer about 9 to 17 in down: about 27% clay, moderate plasticity when wet, pale brown when moist. Possible
- Sandy layerBk A silt loam layer about 17 to 60 in down: about 18% clay, moderate plasticity when wet, very pale brown when moist. Weak indication
What it looks like raw
The topsoil (Ap), 0 to 9 in down in the typical profile: light brownish gray (10YR 6/2), dark grayish brown (10YR 4/2) moist; slightly hard, very friable, slightly sticky and slightly plastic. Raw colour is not fired colour.
About the soil
- Parent material: mixed alluvium and/or loess.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-silty.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 25 map units in Idaho, in these survey areas: Ada County, Idaho; Canyon Area, Idaho.
By state: wild clay in Idaho.
USDA, distribution and extent: Southwestern and south-central Idaho; MLRA 11. The soil is moderately extensive.
USDA, geographic setting: Power soils are on lava flow troughs and buttes on lava plains and shield volcanoes and old stream terraces in valleys. Slopes are 0 to 15 percent. Elevations range from 2,000 to 4,800 feet. These soils formed in silty alluvium from loess and weathered valcanic ash over loamy alluvium from igneous materials. The climate is semi-arid with cool moist winters and hot dry summers. The frost-free period is 100 to 160 days. Average annual precipitation is 8 to 12 inches, including up to 3 feet of snow. Average annual temperature is 45 to 53 degrees F.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Aldape: Strong lead
- Aradaran: Strong lead
- Bowns: Strong lead
- Breadloaf: Strong lead
- Brent: Strong lead
- Castlerock: Strong lead
- Catchell: Strong lead
- Chardoton: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Power silt loam, 0 to 1 percent slopes, map unit PhA in Canyon Area, Idaho.
- Official Series Description: Power(revised 05/2000), established.
- Taxonomic class: Fine-silty, mixed, superactive, mesic Xeric Calciargids
- Rated with rule version 2026-09-28.1; the method is on the About page.