Potratz soil
Wild-clay potential
Possible
Possible: a loamy layer with some clay typically about 10 to 24 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Potratz soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Potratz spot on the map
Rated from the USDA soil survey record for Potratz silt loam, 1 to 3 percent slopes (Canyon Area, Idaho) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 20% clay. It may need settling or refining to become a clay body.
- Note Moderate engineering plasticity index (13).
- Note Thick enough to investigate (about 14 in (36 cm)).
- Note Typically starts within about 10 in (25 cm) of the surface.
- Note Few rock fragments (about 7% by volume).
- Note USDA reports about 23% calcium carbonate; lime in a clay body deserves testing.
Layer by layer
- TopsoilA A silt loam layer about 0 to 3 in down: about 15% clay, moderate plasticity when wet, light brownish gray when moist. Weak indication
- Sandy layerBw A silt loam layer about 3 to 10 in down: about 15% clay, moderate plasticity when wet, pale brown when moist. Weak indication
- Loamy layerBkbest layer A loam layer about 10 to 24 in down: about 20% clay, moderate plasticity when wet, light gray when moist. Possible
- BedrockR Bedrock about 24 to 34 in down: no clay layer to dig. Weak indication
What it looks like raw
The loamy layer (Bk), 10 to 24 in down in the typical profile: light gray (10YR 7/2); hard, firm. Raw colour is not fired colour.
About the soil
- Parent material: loess over bedrock derived from basalt.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: well drained.
- Lithic bedrock typically about 24 in (61 cm) down.
Where it is mapped
Seen on the map as the most common soil in 9 map units in Idaho, in these survey areas: Ada County, Idaho; Canyon Area, Idaho.
By state: wild clay in Idaho.
USDA, distribution and extent: Southwestern Idaho and adjoining regions. The series is moderately extensive.
USDA, geographic setting: Potratz soils are on level basalt plains at elevations of 2,000 to 4,500 feet. Slopes range from 0 to 30 percent. The soils formed in a thin covering of loess over residuum (or possibly colluvium) weathered from basalt. The climate is dry summers. Frost-free period is 120 to 160 days. Mean annual precipitation is 8 to 11 inches, including 0.5 to 2 feet of snow.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Aldape: Strong lead
- Aradaran: Strong lead
- Bowns: Strong lead
- Breadloaf: Strong lead
- Brent: Strong lead
- Castlerock: Strong lead
- Catchell: Strong lead
- Chardoton: Strong lead
See it on the map
Open a Potratz spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Potratz silt loam, 1 to 3 percent slopes, map unit PaB in Canyon Area, Idaho.
- Official Series Description: Potratz(revised 04/2001), established.
- Taxonomic class: Fine-loamy, mixed, superactive, mesic Xeric Haplocalcids
- Rated with rule version 2026-09-28.1; the method is on the About page.