Pipeline soil
Wild-clay potential
Promising
Promising: a clay-enriched layer typically about 8 to 16 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Pipeline soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Pipeline spot on the map
Rated from the USDA soil survey record for Pipeline silt loam, 0 to 2 percent slopes (Ada County, Idaho) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 30% clay in the fine-earth portion.
- Note USDA labels this a "Bt" horizon: a subsoil layer where clay has accumulated.
- Note Moderate engineering plasticity index (15).
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Moderate thickness (about 8 in (21 cm)).
- Note Typically starts within about 8 in (20 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- TopsoilAp A silt loam layer about 0 to 8 in down: about 15% clay, moderate plasticity when wet, brown when moist. Weak indication
- Clay subsoilBtbest layer A silty clay loam layer about 8 to 16 in down: about 30% clay, moderate plasticity when wet, pale brown when moist. Promising
- Sandy layerBk A silt loam layer about 16 to 19 in down: about 15% clay, moderate plasticity when wet, very pale brown when moist. Weak indication
- Bkqm A cemented material layer about 19 to 33 in down: USDA gives no clay percentage or texture for it. Not enough data
- Sandy layerC A very gravelly sand layer about 33 to 65 in down: about 8% clay, low plasticity when wet. Weak indication
What it looks like raw
The clay subsoil (Bt), 8 to 16 in down in the typical profile: pale brown (10YR 6/3), dark brown (10YR 4/3) moist; slightly hard, firm, sticky and plastic. Raw colour is not fired colour.
About the soil
- Parent material: silty alluvium and/or loess over sandy alluvium.
- USDA family mineralogy: mixed.
- USDA family particle-size class: loamy.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 4 map units in Idaho, in these survey areas: Ada County, Idaho.
By state: wild clay in Idaho.
USDA, distribution and extent: Southwestern Idaho. These soils are inextensive.
USDA, geographic setting: Pipeline soils are on alluvial terraces which have received a secondary veneer of loess. Elevations range from 2,500 to 3,500 feet. Slopes are 0 to 12 percent. The soils formed in loess or silt alluvium. The climate is middle-latitude steppe (Trewartha's modified Koppen system), with cool moist winters and dry summers. Mean annual precipitation ranges from 10 to 20 inches. Mean January temperature is about 31 degrees F.; mean July temperature is about 75 degrees F.; the mean annual temperature is 50 degrees to 54 degrees F. Frost-free period is 140 to 160 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Aldape: Strong lead
- Aradaran: Strong lead
- Bowns: Strong lead
- Breadloaf: Strong lead
- Brent: Strong lead
- Castlerock: Strong lead
- Catchell: Strong lead
- Chardoton: Strong lead
See it on the map
Open a Pipeline spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Pipeline silt loam, 0 to 2 percent slopes, map unit 119 in Ada County, Idaho.
- Official Series Description: Pipeline(revised 04/2001), established.
- Taxonomic class: Loamy, mixed, superactive, mesic, shallow Xeric Argidurids
- Rated with rule version 2026-09-28.1; the method is on the About page.