Peasley soil
Wild-clay potential
Strong lead
Strong lead: a clayey layer typically about 7 to 16 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Peasley soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Peasley spot on the map
Rated from the USDA soil survey record for Peasley silty clay loam, 2 to 6 percent slopes (Ada County, Idaho) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 43% clay in the fine-earth portion.
- Raises the potential High engineering plasticity index (31): USDA's estimate suggests plastic behavior when wet.
- Raises the potential The official series description calls the wet soil very sticky and very plastic (a field observation, not a ceramic test).
- Note Moderate thickness (about 9 in (23 cm)).
- Note Typically starts within about 7 in (18 cm) of the surface.
- Note Few rock fragments (about 14% by volume).
- Note Surface layer; expect roots and organic matter.
- Note High shrink-swell (linear extensibility about 7.5%): often very plastic, and prone to cracking as it dries.
- Note Engineering class CH: a clay of high plasticity in the Unified system.
Layer by layer
- Clay-rich layerA A silty clay loam layer about 0 to 7 in down: about 38% clay, high plasticity when wet, brown when moist. Strong lead
- Clay-rich layerABssbest layer A silty clay layer about 7 to 16 in down: about 43% clay, high plasticity when wet, brown when moist. Strong lead
- Clay-rich layerBss A clay layer about 16 to 21 in down: about 45% clay, high plasticity when wet, light yellowish brown when moist. Promising
- Bqm A cemented material layer about 21 to 35 in down: USDA gives no clay percentage or texture for it. Not enough data
- Sandy layerC A fine gravelly loamy sand layer about 35 to 42 in down: about 10% clay, low plasticity when wet, light yellowish brown when moist. Weak indication
- BedrockR Bedrock about 42 to 52 in down: no clay layer to dig. Weak indication
What it looks like raw
The clay-rich layer (ABss), 7 to 16 in down in the typical profile: brown (10YR 5/3), dark brown (10YR 3/3) moist; hard, firm, very sticky and very plastic. Raw colour is not fired colour.
About the soil
- Parent material: loess and/or alluvium derived from granite over bedrock derived from basalt.
- USDA family mineralogy: smectitic. Smectite-rich clays are usually very plastic and shrink a lot as they dry.
- USDA family particle-size class: fine.
- Drainage: well drained.
- Lithic bedrock typically about 42 in (107 cm) down.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Idaho, in these survey areas: Ada County, Idaho.
By state: wild clay in Idaho.
USDA, distribution and extent: Southwestern Idaho. These soils are inextensive.
USDA, geographic setting: Peasley soils are on basalt which have received a veneer of granitic alluvium and loess. Elevations range from 2,800 to 3,500 feet. Slopes are 2 to 6 percent. The soils formed in residuum weathered from basalt with a strong influence of granitic alluvium and loess. The climate is middle-latitude steppe (Trewartha's modified Koppen system), with cool moist winters and dry summers. Mean annual precipitation ranges from 12 to 15 inches. Mean January temperature is about 27 degrees F.; mean July temperature is about 70 degrees F.; the mean annual temperature is 47 degrees to 52 degrees F. Frost-free period is about 140 to 160 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Aldape: Strong lead
- Aradaran: Strong lead
- Bowns: Strong lead
- Breadloaf: Strong lead
- Brent: Strong lead
- Castlerock: Strong lead
- Catchell: Strong lead
- Chardoton: Strong lead
See it on the map
Open a Peasley spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Peasley silty clay loam, 2 to 6 percent slopes, map unit 118 in Ada County, Idaho.
- Official Series Description: Peasley(revised 05/2001), established.
- Taxonomic class: Fine, smectitic, mesic Haplic Durixererts
- Rated with rule version 2026-09-28.1; the method is on the About page.