Parker soil
Wild-clay potential
Weak indication
Weak indication: no layer of Parker shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Parker soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Parker loam, 25 to 60 percent slopes, extremely stony (Chester County, Pennsylvania) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Bedrock or unweathered rock, not a soil layer to dig for clay.
Layer by layer
- Organic top layerOe An organic top layer about 0 to 2 in down, not a clay body. Weak indication
- TopsoilA A loam layer about 2 to 5 in down: about 15% clay, moderate plasticity when wet, dark brown when moist. Weak indication
- Sandy layerE A loam layer about 5 to 7 in down: about 14% clay, moderate plasticity when wet, black when moist. Weak indication
- Sandy layerBw A very gravelly sandy loam layer about 7 to 23 in down: about 17% clay, low plasticity when wet, brown when moist. Weak indication
- Sandy layerC A very gravelly sandy loam layer about 23 to 72 in down: about 11% clay, low plasticity when wet, yellowish brown when moist. Weak indication
- BedrockRbest layer Bedrock about 72 to 157 in down: no clay layer to dig. Weak indication
What it looks like raw
The bedrock (R), 72 to 157 in down in the typical profile: yellowish brown (10YR 5/4); very friable. Raw colour is not fired colour.
About the soil
- Parent material: residuum weathered from granite and gneiss.
- USDA family mineralogy: mixed.
- USDA family particle-size class: loamy-skeletal.
- Drainage: somewhat excessively drained.
- Lithic bedrock typically about 72 in (182 cm) down.
Where it is mapped
Seen on the map as the most common soil in 24 map units in Delaware, Pennsylvania, in these survey areas: Chester County, Pennsylvania; Delaware County, Pennsylvania; Montgomery County, Pennsylvania; New Castle County, Delaware.
By state: wild clay in Delaware,wild clay in Pennsylvania.
USDA, distribution and extent: New Jersey and Virginia. The series is of moderate extent, with approximately 85,000 acres identified.
USDA, geographic setting: Parker soils formed in residuum derived from granitic gneiss bedrock. They are on ridges and hills in the uplands. Slopes of 15 percent are common but the range extends from 3 to 70 percent. The mean annual temperature ranges from 45 to 55 degrees F.; mean annual precipitation ranges from 40 to 48 inches; and the frost-free season ranges from 150 to 190 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Watchung: Strong lead
- Montalto: Strong lead
- Talleyville: Strong lead
- Glenelg: Promising
- Hatboro: Promising
- Baile: Promising
- Califon: Promising
- Chester: Promising
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 97%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Parker loam, 25 to 60 percent slopes, extremely stony, map unit PbF in Chester County, Pennsylvania.
- Official Series Description: Parker(revised 12/2021), established.
- Taxonomic class: Loamy-skeletal, mixed, semiactive, mesic Typic Dystrudepts
- Rated with rule version 2026-09-28.1; the method is on the About page.