Ostler soil
Wild-clay potential
Strong lead
Strong lead: a clayey layer typically about 28 to 37 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Ostler soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Ostler-Bertag association, very steep (Morgan Area, Utah - Morgan County and Part of Weber County) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 38% clay in the fine-earth portion.
- Note Moderate engineering plasticity index (17.5).
- Raises the potential The official series description calls the wet soil moderately sticky and very plastic (a field observation, not a ceramic test).
- Note Moderate thickness (about 9 in (23 cm)).
- Note Typically starts about 28 in (71 cm) down; expect real digging or look for cuts and banks.
- Missing data Rock fragment content is not reported.
Layer by layer
- TopsoilA11 A loam layer about 0 to 7 in down: about 23% clay, moderate plasticity when wet, black when moist. Weak indication
- TopsoilA12 A loam layer about 7 to 18 in down: about 23% clay, moderate plasticity when wet, black when moist. Possible
- Clay-rich layerB21t A clay loam layer about 18 to 22 in down: about 38% clay, moderate plasticity when wet, brown when moist. Promising
- Clay-rich layerB22t A clay layer about 22 to 28 in down: about 45% clay, high plasticity when wet, light olive brown when moist. Strong lead
- Clay-rich layerB23tbest layer A clay loam layer about 28 to 37 in down: about 38% clay, moderate plasticity when wet, brown when moist. Strong lead
- Loamy layerB24t A sandy clay loam layer about 37 to 49 in down: about 31% clay, high plasticity when wet, brown when moist. Promising
- Clay-rich layerC A clay loam layer about 49 to 60 in down: about 38% clay, high plasticity when wet, crushed colors are light brownish gray when moist. Promising
What it looks like raw
The clay-rich layer (B23t), 28 to 37 in down in the typical profile: brown (10YR 4/3), light gray (10YR 7/2) dry; extremely hard, very firm, sticky and very plastic. Raw colour is not fired colour.
About the soil
- Parent material: colluvium derived from limestone, sandstone and/or siltstone.
- USDA family particle-size class: fine.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 3 map units in Utah, in these survey areas: Morgan Area, Utah - Morgan County and Part of Weber County.
By state: wild clay in Utah.
USDA, distribution and extent: Ostler soils are of small extent in the foothills of northern Utah; MLRA 47.
USDA, geographic setting: Landform--all aspects of hillslopes of foothills
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Ant Flat: Strong lead
- Bertag: Strong lead
- Broadhead: Strong lead
- Crooked Creek: Strong lead
- Donner: Strong lead
- Hawkins: Strong lead
- Herd: Strong lead
- Isbell: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 50%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Ostler-Bertag association, very steep, map unit ODG in Morgan Area, Utah - Morgan County and Part of Weber County.
- Official Series Description: Ostler(revised 01/2023), established.
- Taxonomic class: Fine, smectitic, frigid Typic Argixerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.