Keating soil
Wild-clay potential
Strong lead
Strong lead: a clay-enriched layer typically about 16 to 24 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Keating soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Keating spot on the map
Rated from the USDA soil survey record for Keating-Waterbury complex, 1 to 5 percent slopes (Ada County, Idaho) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 47% clay in the fine-earth portion.
- Note USDA labels this a "Bt3" horizon: a subsoil layer where clay has accumulated.
- Raises the potential High engineering plasticity index (34): USDA's estimate suggests plastic behavior when wet.
- Note Moderate thickness (about 8 in (20 cm)).
- Note Typically starts within about 16 in (41 cm) of the surface.
- Note Few rock fragments (about 5% by volume).
- Note High shrink-swell (linear extensibility about 9.8%): often very plastic, and prone to cracking as it dries.
- Note Engineering class CH: a clay of high plasticity in the Unified system.
Layer by layer
- Loamy layerE A silt loam layer about 0 to 1 in down: about 20% clay, moderate plasticity when wet, very dark brown when moist. Weak indication
- TopsoilA A silt loam layer about 1 to 5 in down: about 23% clay, moderate plasticity when wet, very dark brown when moist. Weak indication
- Clay subsoilBt1 A silty clay loam layer about 5 to 9 in down: about 30% clay, high plasticity when wet, dark brown when moist. Possible
- Clay subsoilBt2 A silty clay loam layer about 9 to 16 in down: about 36% clay, high plasticity when wet, dark brown when moist. Strong lead
- Clay subsoilBt3best layer A clay layer about 16 to 24 in down: about 47% clay, high plasticity when wet, dark brown when moist. Strong lead
- Bedrock2R Bedrock about 24 to 34 in down: no clay layer to dig. Weak indication
What it looks like raw
The clay subsoil (Bt3), 16 to 24 in down in the typical profile: dark brown (7.5YR 3/4). Raw colour is not fired colour.
About the soil
- Parent material: silty alluvium and/or weathered volcanic ash over basalt.
- USDA family mineralogy: smectitic. Smectite-rich clays are usually very plastic and shrink a lot as they dry.
- USDA family particle-size class: fine.
- Drainage: well drained.
- Lithic bedrock typically about 24 in (61 cm) down.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Idaho, in these survey areas: Ada County, Idaho.
By state: wild clay in Idaho.
USDA, distribution and extent: Eastern Oregon. The series is not extensive.
USDA, geographic setting: Keating soils are on hills, with
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Aldape: Strong lead
- Aradaran: Strong lead
- Bowns: Strong lead
- Breadloaf: Strong lead
- Brent: Strong lead
- Castlerock: Strong lead
- Catchell: Strong lead
- Chardoton: Strong lead
See it on the map
Open a Keating spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 45%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Keating-Waterbury complex, 1 to 5 percent slopes, map unit 6017 in Ada County, Idaho.
- Official Series Description: Keating, established.
- Taxonomic class: Fine, smectitic, mesic Typic Argixerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.