Kearns soil
Wild-clay potential
Possible
Possible: a loamy layer with some clay typically about 9 to 15 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Kearns soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Kearns silt loam, 1 to 3 percent slopes (Box Elder County, Utah, Eastern Part) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 23% clay. It may need settling or refining to become a clay body.
- Note Moderate engineering plasticity index (10).
- Note The official series description calls the wet soil slightly sticky and slightly plastic.
- Note Moderate thickness (about 6 in (15 cm)).
- Note Typically starts within about 9 in (23 cm) of the surface.
- Missing data Rock fragment content is not reported.
- Note USDA reports about 13% calcium carbonate; lime in a clay body deserves testing.
Layer by layer
- Loamy layerH1 A silt loam layer about 0 to 5 in down: about 21% clay, moderate plasticity when wet, grayish brown when moist. Weak indication
- Loamy layerH2 A silt loam layer about 5 to 9 in down: about 21% clay, moderate plasticity when wet, brown when moist. Weak indication
- Loamy layerH3best layer A silt loam layer about 9 to 15 in down: about 23% clay, moderate plasticity when wet, pale brown when moist. Possible
- Loamy layerH4 A silt loam layer about 15 to 20 in down: about 23% clay, moderate plasticity when wet, pale brown when moist. Weak indication
- Loamy layerH5 A silt loam layer about 20 to 39 in down: about 23% clay, moderate plasticity when wet, very pale brown when moist. Weak indication
- Sandy layerH6 A loam layer about 39 to 76 in down: about 12% clay, low plasticity when wet, pale brown when moist. Weak indication
What it looks like raw
The loamy layer (H3), 9 to 15 in down in the typical profile: pale brown (10YR 6/3), brown (10YR4/3) moist; hard, friable, slightly sticky and slightly plastic. Raw colour is not fired colour.
About the soil
- Parent material: alluvium and lacustrine deposits from limestone, quartzite, and sandstone.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-silty.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 3 map units in Utah, in these survey areas: Box Elder County, Utah, Eastern Part.
By state: wild clay in Utah.
USDA, distribution and extent: Northern Utah and southern Idaho. These soils are moderately extensive. MLRA 28A.
USDA, geographic setting: Kearns soils are on slightly convex alluvial fans and intermediate and high lake terraces. These soils formed in alluvium and lacustrine deposits derived from sedimentary rocks such as limestone and sandstone. Slopes are 0 to 20 percent. The mean annual precipitation is 12 to 18 inches. The mean annual temperature is 47 to 54 degrees F. and the mean summer temperature is 65 to 75 degrees F. The frost-free period is 100 to 180 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Collett: Strong lead
- Eimarsh: Strong lead
- Goring: Strong lead
- Lasil: Strong lead
- Manila: Strong lead
- Obray: Strong lead
- Payson: Strong lead
- Pintailake: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Kearns silt loam, 1 to 3 percent slopes, map unit KeB in Box Elder County, Utah, Eastern Part.
- Official Series Description: Kearns(revised 04/2005), established.
- Taxonomic class: Fine-silty, mixed, superactive, mesic Calcic Haploxerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.