Harrisville soil
Wild-clay potential
Promising
Promising: a loamy layer with some clay typically about 45 to 60 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Harrisville soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Harrisville spot on the map
Rated from the USDA soil survey record for Harrisville-Leland complex, 0 to 1 percent slopes (Davis-Weber Area, Utah) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 31% clay in the fine-earth portion.
- Note Moderate engineering plasticity index (15).
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 15 in (38 cm)).
- Note Typically starts about 45 in (114 cm) down; expect real digging or look for cuts and banks.
- Missing data Rock fragment content is not reported.
- Note USDA reports about 18% calcium carbonate; lime in a clay body deserves testing.
Layer by layer
- TopsoilAp A silt loam layer about 0 to 8 in down: about 23% clay, moderate plasticity when wet, grayish brown when moist. Weak indication
- Loamy layerB21t A silty clay loam layer about 8 to 14 in down: about 31% clay, moderate plasticity when wet, pale brown when moist. Promising
- Loamy layerB22tca A silty clay loam layer about 14 to 22 in down: about 31% clay, moderate plasticity when wet, pink when moist. Promising
- Loamy layerB3ca A silty clay loam layer about 22 to 33 in down: about 31% clay, moderate plasticity when wet, pink when moist. Promising
- Loamy layerC1 A silty clay loam layer about 33 to 45 in down: about 31% clay, moderate plasticity when wet, pink when moist. Promising
- Loamy layerC2best layer A silty clay loam layer about 45 to 60 in down: about 31% clay, moderate plasticity when wet, pink when moist. Promising
What it looks like raw
The loamy layer (C2), 45 to 60 in down in the typical profile: pink (7.5YR 7/4), brown (7.5YR 5/4) moist; extremely hard, firm, moderately sticky and moderately plastic. Raw colour is not fired colour.
About the soil
- Parent material: alluvium and/or lacustrine deposits.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-silty.
- Drainage: somewhat poorly drained.
Where it is mapped
Seen on the map as the most common soil in 5 map units in Utah, in these survey areas: Davis-Weber Area, Utah.
By state: wild clay in Utah.
USDA, distribution and extent: Northwestern Utah. These soils are not extensive with about 7,200 acres of the series mapped to date. MLRA 28A.
USDA, geographic setting: Harrisville soils are on smooth to undulating low lake terraces. These soils have formed in alluvium and lacustrine deposits derived from sedimentary rocks such as limestone and sandstone; igneous rocks such as granite; and metamorphic rocks such as quartzite and gneiss. Slopes are 0 to 6 percent. Elevations range from 4,250 to 4,500 feet. The climate is dry subhumid. The mean annual precipitation is 13 to 18 inches. The mean annual temperature is 45 to 52 degrees F., the mean summer temperature is 68 to 72 degrees F., and the frost-free period is 120 to 170 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Abbott: Strong lead
- Airport: Strong lead
- Eimarsh: Strong lead
- Kirkham: Strong lead
- Payson: Strong lead
- Pintailake: Strong lead
- Saltair: Strong lead
- Woods Cross: Strong lead
See it on the map
Open a Harrisville spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 60%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Harrisville-Leland complex, 0 to 1 percent slopes, map unit HLA in Davis-Weber Area, Utah.
- Official Series Description: Harrisville(revised 02/2006), established.
- Taxonomic class: Fine-silty, mixed, active, mesic Typic Natrixerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.