Gladstone soil
Wild-clay potential
Possible
Possible: a clay-enriched layer typically about 22 to 37 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Gladstone soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Gladstone spot on the map
Rated from the USDA soil survey record for Gladstone gravelly loam, 3 to 8 percent slopes (Berks County, Pennsylvania) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 23% clay. It may need settling or refining to become a clay body.
- Note USDA labels this a "Bt2" horizon: a subsoil layer where clay has accumulated.
- Note Moderate engineering plasticity index (15).
- Note The official series description calls the wet soil slightly sticky and slightly plastic.
- Note Thick enough to investigate (about 15 in (38 cm)).
- Note Typically starts within about 22 in (56 cm) of the surface.
- Note Few rock fragments (about 13% by volume).
Layer by layer
- TopsoilAp A gravelly loam layer about 0 to 10 in down: about 16% clay, moderate plasticity when wet, brown when moist. Weak indication
- Clay subsoilBt1 A sandy clay loam layer about 10 to 22 in down: about 21% clay, moderate plasticity when wet, brown when moist. Possible
- Clay subsoilBt2best layer A loam layer about 22 to 37 in down: about 23% clay, moderate plasticity when wet, strong brown when moist. Possible
- Sandy layerC A sandy loam layer about 37 to 66 in down: about 15% clay, moderate plasticity when wet, strong brown when moist. Weak indication
- BedrockR Bedrock about 66 to 76 in down: no clay layer to dig. Weak indication
What it looks like raw
The clay subsoil (Bt2), 22 to 37 in down in the typical profile: strong brown (7.5YR 5/6); gravelly loam; friable, slightly sticky, slightly plastic. Raw colour is not fired colour.
About the soil
- Parent material: loamy colluvium derived from granite and gneiss and/or loamy residuum weathered from granite and gneiss.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: well drained.
- Lithic bedrock typically about 66 in (168 cm) down.
Where it is mapped
Seen on the map as the most common soil in 45 map units in Pennsylvania, in these survey areas: Berks County, Pennsylvania; Chester County, Pennsylvania; Delaware County, Pennsylvania; Lancaster County, Pennsylvania; Lebanon County, Pennsylvania; Lehigh County, Pennsylvania; Montgomery County, Pennsylvania; Northampton County, Pennsylvania.
By state: wild clay in Pennsylvania.
USDA, distribution and extent: Gladstone soils are currently recognized in New Jersey and Pennsylvania. Approximatly 65,000 acres have been mapped.
USDA, geographic setting: Gladstone soils are on upland divides and rolling foot hills of the Highlands section of Appalachian Province, the Reading Prong Section of the New England province and the Gettysburg-Newark Lowland and the Piedmont Upland Sections of the Northern Piedmont province at elevations ranging between 250 and 1400 feet but dominantly between 400 and 1100 feet. The soils formed in colluvium and residuum from granitic gneiss and in some places the regolith appears to have been disturbed by glacial or paraglacial action. The underlying bedrock is granitic gneiss that, in many places, is highly weathered in the upper several inches. Slopes are generally between 3 and 25 percent, but range from 0 to...
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Watchung: Strong lead
- Hagerstown: Strong lead
- Montalto: Strong lead
- Talleyville: Strong lead
- Duffield: Promising
- Holly: Promising
- Bowmansville: Promising
- Mount Lucas: Promising
See it on the map
Open a Gladstone spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Gladstone gravelly loam, 3 to 8 percent slopes, map unit GeB in Berks County, Pennsylvania.
- Official Series Description: Gladstone(revised 09/2008), established.
- Taxonomic class: Fine-loamy, mixed, active, mesic Typic Hapludults
- Rated with rule version 2026-09-28.1; the method is on the About page.