Garbutt soil
Wild-clay potential
Weak indication
Weak indication: no layer of Garbutt shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Garbutt soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Garbutt spot on the map
Rated from the USDA soil survey record for Garbutt silt loam, 0 to 2 percent slopes (Malheur County, Oregon, Northeastern Part) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Too little clay to be a clay body on its own: about 12% clay.
- Lowers the potential Low engineering plasticity index (5): little plastic behavior expected when wet.
- Note Thick enough to investigate (about 24 in (60 cm)).
- Note Typically starts about 38 in (97 cm) down; expect real digging or look for cuts and banks.
- Note Few rock fragments (about 4% by volume).
- Note USDA reports about 9% calcium carbonate; lime in a clay body deserves testing.
Layer by layer
- TopsoilAp A silt loam layer about 0 to 10 in down: about 15% clay, moderate plasticity when wet, light brownish gray when moist. Weak indication
- Sandy layerC1 A silt loam layer about 10 to 23 in down: about 12% clay, low plasticity when wet, light gray when moist. Weak indication
- Sandy layerC2 A silt loam layer about 23 to 38 in down: about 12% clay, low plasticity when wet, light gray when moist. Weak indication
- Sandy layerC3best layer A silt loam layer about 38 to 62 in down: about 12% clay, low plasticity when wet, light gray when moist. Weak indication
What it looks like raw
The sandy layer (C3), 38 to 62 in down in the typical profile: light gray (10YR 7/2), dark grayish brown (10YR 4/2) moist; hard, firm. Raw colour is not fired colour.
About the soil
- Parent material: alluvium and loess.
- USDA family particle-size class: coarse-silty.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 11 map units in Idaho, Oregon, in these survey areas: Ada County, Idaho; Canyon Area, Idaho; Malheur County, Oregon, Northeastern Part.
By state: wild clay in Idaho,wild clay in Oregon.
USDA, distribution and extent: Southwestern and south central Idaho and eastern Oregon. The soils are extensive.
USDA, geographic setting: Garbutt soils are on alluvial fans, low terraces, and basalt plains at elevations of 2,000 to 5,400 feet. They formed in alluvium dominantly from lacustrine siltstone. Slopes are 0 to 12 percent. Average annual precipitation is 6 to 10 inches. Average annual temperature is 45 to 53 degrees F. The frost-free period is 110 to 165 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Aldape: Strong lead
- Aradaran: Strong lead
- Bowns: Strong lead
- Breadloaf: Strong lead
- Brent: Strong lead
- Castlerock: Strong lead
- Catchell: Strong lead
- Chardoton: Strong lead
See it on the map
Open a Garbutt spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 77%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Garbutt silt loam, 0 to 2 percent slopes, map unit 12A in Malheur County, Oregon, Northeastern Part.
- Official Series Description: Garbutt(revised 10/2002), established.
- Taxonomic class: Coarse-silty, mixed, superactive, calcareous, mesic Typic Torriorthents
- Rated with rule version 2026-09-28.1; the method is on the About page.