Frohman soil
Wild-clay potential
Weak indication
Weak indication: no layer of Frohman shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Frohman soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Frohman spot on the map
Rated from the USDA soil survey record for Frohman silt loam, 0 to 2 percent slopes (Malheur County, Oregon, Northeastern Part) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Too little clay to be a clay body on its own: about 15% clay.
- Lowers the potential Low engineering plasticity index (3): little plastic behavior expected when wet.
- Lowers the potential The official series description calls the wet soil nonsticky and nonplastic.
- Note Moderate thickness (about 10 in (25 cm)).
- Note Typically starts within about 18 in (46 cm) of the surface.
- Note Few rock fragments (about 2% by volume).
Layer by layer
- TopsoilAp A silt loam layer about 0 to 8 in down: about 15% clay, low plasticity when wet, light brownish gray when moist. Weak indication
- Sandy layerBw A silt loam layer about 8 to 12 in down: about 15% clay, low plasticity when wet, light brownish gray when moist. Weak indication
- Bqm A cemented material layer about 12 to 18 in down: USDA gives no clay percentage or texture for it. Not enough data
- Sandy layerC1best layer A silt loam layer about 18 to 28 in down: about 15% clay, low plasticity when wet, light gray when moist. Weak indication
- Sandy layerC2 A silt loam layer about 28 to 36 in down: about 15% clay, low plasticity when wet, light gray when moist. Weak indication
- 2Bkqm A cemented material layer about 36 to 42 in down: USDA gives no clay percentage or texture for it. Not enough data
What it looks like raw
The sandy layer (C1), 18 to 28 in down in the typical profile: light gray (10YR 7/2), brown (10YR 5/3) moist; hard, friable, nonsticky and nonplastic. Raw colour is not fired colour.
About the soil
- Parent material: alluvium and lacustrine deposits.
- USDA family mineralogy: mixed.
- USDA family particle-size class: loamy.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 5 map units in Oregon, in these survey areas: Malheur County, Oregon, Northeastern Part; Malheur County, Oregon, Northern Part.
By state: wild clay in Oregon.
USDA, distribution and extent: MLRA 11. The series is of moderate extent.
USDA, geographic setting: Frohman soils are on nearly level to gently sloping terraces. Slopes are 0 to 20 percent. Elevation is 2100 to 3000 feet. The soils formed in silty lacustrine material and very gravelly alluvium of mixed origin. The climate is characterized by cool, moist winters and and hot, dry summers. The mean annual precipitation is 9 to 11 inches. The mean annual temperature is 50 to 54 degrees F. The mean summer temperature is 70 to 74 degrees F. and the mean winter temperature is 31 to 33 degrees F. The frost-free period is 130 to 170 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Poall: Strong lead
- Ratsnest: Strong lead
- McLoughlin: Promising
- Ruclick: Possible
- Nyssa: Weak indication
- Turbyfill: Weak indication
- Cencove: Weak indication
- Drewsey: Weak indication
See it on the map
Open a Frohman spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 93%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Frohman silt loam, 0 to 2 percent slopes, map unit 11A in Malheur County, Oregon, Northeastern Part.
- Official Series Description: Frohman(revised 05/2013), established.
- Taxonomic class: Loamy, mixed, superactive, mesic, shallow Xeric Haplodurids
- Rated with rule version 2026-09-28.1; the method is on the About page.