Fridlo soil
Wild-clay potential
Promising
Promising: a loamy layer with some clay typically about 15 to 21 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Fridlo soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Fridlo silt loam, sandy substratum, 0 to 1 percent slopes (Box Elder County, Utah, Eastern Part) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 29% clay in the fine-earth portion.
- Raises the potential High engineering plasticity index (20): USDA's estimate suggests plastic behavior when wet.
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Moderate thickness (about 6 in (15 cm)).
- Note Typically starts within about 15 in (38 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- Loamy layerH1 A silt loam layer about 0 to 6 in down: about 24% clay, moderate plasticity when wet, grayish brown when moist. Possible
- Loamy layerH2 A silt loam layer about 6 to 9 in down: about 24% clay, moderate plasticity when wet, grayish brown when moist. Weak indication
- Loamy layerH3 A silt loam layer about 9 to 15 in down: about 26% clay, moderate plasticity when wet, brown when moist. Possible
- Loamy layerH4best layer A silty clay loam layer about 15 to 21 in down: about 29% clay, high plasticity when wet, pale brown when moist. Promising
- Loamy layerH5 A silt loam layer about 21 to 29 in down: about 21% clay, moderate plasticity when wet, very pale brown when moist. Possible
- Sandy layerH6 A sandy loam layer about 29 to 60 in down: about 10% clay, moderate plasticity when wet, very pale brown when moist. Weak indication
What it looks like raw
The loamy layer (H4), 15 to 21 in down in the typical profile: pale brown (10YR 6/3), brown (10YR 4/3) moist; very hard, firm, moderately sticky and moderately plastic. Raw colour is not fired colour.
About the soil
- Parent material: alluvium and lacustine deposits derived from mixed rocks.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-silty.
- Drainage: moderately well drained.
Where it is mapped
Seen on the map as the most common soil in 2 map units in Utah, in these survey areas: Box Elder County, Utah, Eastern Part.
By state: wild clay in Utah.
USDA, distribution and extent: Northwestern Utah and southeastern Idaho. These soils are moderately extensive. MLRA 28A.
USDA, geographic setting: Fridlo soils are on low lake terraces and fan remnants with east, south, and west aspect. These soils formed in lacustrine deposits or alluvium derived from mixed sedimentary rocks. Slopes are 0 to 4 percent. Elevations range from 4,200 to 5,000 feet. The climate is dry subhumid. The mean annual precipitation is 12 to 16 inches, the mean annual temperature is 45 to 52 degrees F., and the frost-free period is 100 to 150 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Collett: Strong lead
- Eimarsh: Strong lead
- Goring: Strong lead
- Lasil: Strong lead
- Manila: Strong lead
- Obray: Strong lead
- Payson: Strong lead
- Pintailake: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 80%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Fridlo silt loam, sandy substratum, 0 to 1 percent slopes, map unit Ap in Box Elder County, Utah, Eastern Part.
- Official Series Description: Fridlo(revised 02/2006), established.
- Taxonomic class: Fine-silty, mixed, superactive, mesic Typic Natrixerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.