Delaware soil
Wild-clay potential
Weak indication
Weak indication: no layer of Delaware shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Delaware soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Delaware spot on the map
Rated from the USDA soil survey record for Delaware fine sandy loam, 0 to 3 percent slopes (Northampton County, Pennsylvania) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Too little clay to be a clay body on its own: about 5% clay.
- Lowers the potential Low engineering plasticity index (0): little plastic behavior expected when wet.
- Note Thick enough to investigate (about 47 in (119 cm)).
- Note Typically starts about 40 in (102 cm) down; expect real digging or look for cuts and banks.
- Note Few rock fragments (about 6% by volume).
Layer by layer
- TopsoilAp A fine sandy loam layer about 0 to 10 in down: about 11% clay, low plasticity when wet, dark yellowish brown when moist. Weak indication
- Sandy layerBw A very fine sandy loam layer about 10 to 40 in down: about 5% clay, low plasticity when wet, dark yellowish brown when moist. Weak indication
- Sandy layerCbest layer A loamy fine sand layer about 40 to 87 in down: about 5% clay, low plasticity when wet, percent light brownish gray when moist. Weak indication
What it looks like raw
The sandy layer (C), 40 to 87 in down in the typical profile: percent light brownish gray (10YR 6/2), percent brown (10YR 5/3); sandy loam. Raw colour is not fired colour.
About the soil
- Parent material: postglacial alluvium derived from sandstone and shale.
- USDA family mineralogy: mixed.
- USDA family particle-size class: coarse-loamy.
- Drainage: well drained.
- Lithic bedrock typically about 90 in (229 cm) down.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Pennsylvania, in these survey areas: Northampton County, Pennsylvania.
By state: wild clay in Pennsylvania.
USDA, distribution and extent: Northeastern and eastern Pennsylvania, and Central Pennsylvania along major rivers. MLRA 140. The series is of small extent.
USDA, geographic setting: The Delaware soils are low to middle river terraces along major rivers and creeks. Slope ranges from 0 to 25 percent. Delaware soils formed in postglacial alluvium, mainly from areas of sandstone, shale, and siltstone. Annual precipitation ranges from 35 to 50 inches and is evenly distributed throughout the year. Mean annual temperature ranges from 45 to 52 degrees F., and the growing season ranges from 110 to 200 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Brinkerton: Promising
- Califon: Promising
- Cokesbury: Promising
- Comly: Promising
- Duffield: Promising
- Holly: Promising
- Washington: Promising
- Allenwood: Possible
See it on the map
Open a Delaware spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Delaware fine sandy loam, 0 to 3 percent slopes, map unit DaA in Northampton County, Pennsylvania.
- Official Series Description: Delaware(revised 10/2009), established.
- Taxonomic class: Coarse-loamy, mixed, active, mesic Typic Dystrudepts
- Rated with rule version 2026-09-28.1; the method is on the About page.