Cokesbury soil
Wild-clay potential
Promising
Promising: a clay-enriched layer typically about 17 to 26 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Cokesbury soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Cokesbury spot on the map
Rated from the USDA soil survey record for Cokesbury silt loam, 0 to 8 percent slopes, very stony (Chester County, Pennsylvania) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 28% clay in the fine-earth portion.
- Note USDA labels this a "Btg" horizon: a subsoil layer where clay has accumulated.
- Note Moderate engineering plasticity index (11.5).
- Note The official series description calls the wet soil slightly plastic.
- Note Moderate thickness (about 9 in (23 cm)).
- Note Typically starts within about 17 in (43 cm) of the surface.
- Note Few rock fragments (about 14% by volume).
Layer by layer
- TopsoilAg A channery silt loam layer about 0 to 7 in down: about 15% clay, low plasticity when wet, very dark grayish brown when moist. Weak indication
- Loamy layerBAg A gravelly sandy clay loam layer about 7 to 17 in down: about 25% clay, moderate plasticity when wet, light gray when moist. Weak indication
- Clay subsoilBtgbest layer A clay loam layer about 17 to 26 in down: about 28% clay, moderate plasticity when wet, light brownish gray when moist. Promising
- Loamy layerBgx A gravelly clay loam layer about 26 to 38 in down: about 28% clay, moderate plasticity when wet, strong brown when moist. Possible
- Loamy layerC A gravelly loam layer about 38 to 60 in down: about 20% clay, moderate plasticity when wet, pale brown when moist. Weak indication
What it looks like raw
The clay subsoil (Btg), 17 to 26 in down in the typical profile: light brownish gray (2.5Y 6/2); gravelly clay loam, moderate very coarse prismatic structure parting to moderate medium subangular blocky structure; friable, slightly plastic. Raw colour is not fired colour.
About the soil
- Parent material: colluvium derived from granite and gneiss.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: poorly drained.
- Lithic bedrock typically about 80 in (203 cm) down.
- Rated hydric (wetland) soil; often saturated and protected.
Where it is mapped
Seen on the map as the most common soil in 6 map units in Pennsylvania, in these survey areas: Chester County, Pennsylvania; Lehigh County, Pennsylvania; Northampton County, Pennsylvania.
By state: wild clay in Pennsylvania.
USDA, distribution and extent: Glaciated West-central New Jersey and East-central Pennsylvania and adjacent driftless uplands of the Northern Piedmont. The series is of small extent.
USDA, geographic setting: Cokesbury soils are on 0 to 8 percent concave footslope and toeslope positions of headslopes, in upland depressions or along waterways and bands that extend along the base of steeper slopes. They are formed either in old till or on driftless landscapes in colluvium from primarily granitic gneiss or other acid crystalline rocks. Average annual temperature ranges from 45 to 50 degrees F. and average annual precipitation from 40 to 48 inches. Frost free period ranges form 160 to 190 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Watchung: Strong lead
- Duffield: Promising
- Holly: Promising
- Bowmansville: Promising
- Brinkerton: Promising
- Califon: Promising
- Comly: Promising
- Croton: Promising
See it on the map
Open a Cokesbury spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Cokesbury silt loam, 0 to 8 percent slopes, very stony, map unit CqB in Chester County, Pennsylvania.
- Official Series Description: Cokesbury(revised 02/2008), established.
- Taxonomic class: Fine-loamy, mixed, active, mesic Typic Fragiaquults
- Rated with rule version 2026-09-28.1; the method is on the About page.