Corder soil
Wild-clay potential
Possible
Possible: a clay-enriched layer typically about 4 to 11 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Corder soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Corder-Tadpole complex, 2 to 8 percent slopes (Ada County, Idaho) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 22% clay. It may need settling or refining to become a clay body.
- Note USDA labels this a "Bt" horizon: a subsoil layer where clay has accumulated.
- Note Moderate engineering plasticity index (15).
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Moderate thickness (about 7 in (18 cm)).
- Note Typically starts within about 4 in (10 cm) of the surface.
- Note Few rock fragments (about 0% by volume).
Layer by layer
- TopsoilA1 A silt loam layer about 0 to 2 in down: about 12% clay, moderate plasticity when wet, pale brown when moist. Weak indication
- TopsoilA2 A silt loam layer about 2 to 4 in down: about 14% clay, moderate plasticity when wet, pale brown when moist. Weak indication
- Clay subsoilBtbest layer A silt loam layer about 4 to 11 in down: about 22% clay, moderate plasticity when wet, brown when moist. Possible
- Sandy layerBkq A gravelly silt loam layer about 11 to 16 in down: about 15% clay, moderate plasticity when wet, pale brown when moist. Weak indication
- Bkqm A cemented material layer about 16 to 24 in down: USDA gives no clay percentage or texture for it. Not enough data
- Bedrock2R Bedrock about 24 to 28 in down: no clay layer to dig. Weak indication
What it looks like raw
The clay subsoil (Bt), 4 to 11 in down in the typical profile: brown (10YR 5/3), brown (10YR 4/3) moist; hard, friable, moderately sticky and moderately plastic. Raw colour is not fired colour.
About the soil
- Parent material: loess and/or weathered volcanic ash and/or colluvium derived from basalt over basalt.
- USDA family mineralogy: mixed.
- USDA family particle-size class: loamy.
- Drainage: well drained.
- Lithic bedrock typically about 24 in (61 cm) down.
Where it is mapped
Seen on the map as the most common soil in 2 map units in Idaho, in these survey areas: Ada County, Idaho.
By state: wild clay in Idaho.
USDA, distribution and extent: Ada and Elmore Counties, Idaho. MLRA 11. These soils are of limited extent.
USDA, geographic setting: Corder soils are on plug domes, lava flow lobes, pressure ridges and tumuli on shield volcanoes of plains. Elevations are 2,800 to 3,550 feet. Slopes range from 0 to 25 percent. These soils formed in loess and weathered volcanic ash mixed with colluvium from basalt. Average annual precipitation is 6 to 8 inches. Average annual temperature is 51 to 54 degrees F. Frost-free period is 130 to 160 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Aldape: Strong lead
- Aradaran: Strong lead
- Bowns: Strong lead
- Breadloaf: Strong lead
- Brent: Strong lead
- Castlerock: Strong lead
- Catchell: Strong lead
- Chardoton: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 65%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Corder-Tadpole complex, 2 to 8 percent slopes, map unit 4005 in Ada County, Idaho.
- Official Series Description: Corder(revised 07/2012), established.
- Taxonomic class: Loamy, mixed, superactive, mesic, shallow Typic Argidurids
- Rated with rule version 2026-09-28.1; the method is on the About page.