Conestoga soil
Wild-clay potential
Promising
Promising: a clay-enriched layer typically about 27 to 38 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Conestoga soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Conestoga spot on the map
Rated from the USDA soil survey record for Conestoga silt loam, 0 to 3 percent slopes (Lancaster County, Pennsylvania) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 30% clay in the fine-earth portion.
- Note USDA labels this a "Bt2" horizon: a subsoil layer where clay has accumulated.
- Raises the potential High engineering plasticity index (21): USDA's estimate suggests plastic behavior when wet.
- Note The official series description calls the wet soil slightly sticky and slightly plastic.
- Note Moderate thickness (about 11 in (28 cm)).
- Note Typically starts about 27 in (69 cm) down; expect real digging or look for cuts and banks.
- Missing data Rock fragment content is not reported.
Layer by layer
- TopsoilAp A silt loam layer about 0 to 10 in down: about 20% clay, moderate plasticity when wet, dark grayish brown when moist. Possible
- Clay subsoilBt1 A silt loam layer about 10 to 27 in down: about 25% clay, moderate plasticity when wet, yellowish brown when moist. Possible
- Clay subsoilBt2best layer A silty clay loam layer about 27 to 38 in down: about 30% clay, high plasticity when wet, yellowish brown when moist. Promising
- Loamy layerC1 A channery loam layer about 38 to 60 in down: about 18% clay, moderate plasticity when wet, variegated light olive brown when moist. Weak indication
- Sandy layerC2 A channery loam layer about 60 to 75 in down: about 15% clay, moderate plasticity when wet, light olive brown when moist. Weak indication
What it looks like raw
The clay subsoil (Bt2), 27 to 38 in down in the typical profile: yellowish brown (10YR 5/6); silty clay loam; firm, slightly sticky, slightly plastic. Raw colour is not fired colour.
About the soil
- Parent material: residuum weathered from limestone and/or schist.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 6 map units in Pennsylvania, in these survey areas: Chester County, Pennsylvania; Lancaster County, Pennsylvania.
By state: wild clay in Pennsylvania.
USDA, distribution and extent: Northern Piedmont Plateau in southeastern Pennsylvania and central Maryland. The series is of moderate extent.
USDA, geographic setting: Conestoga soils are nearly level to moderately steep uplands. Slope gradients are between 0 and 25 percent. These soils formed in residuum weathered from micaceous limestone and calcareous schist. The climate is humid and temperate, with mean annual precipitation of 40 to 46 inches; average annual temperature is 52 to 55 degrees F, and the growing season is 170 to 190 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Watchung: Strong lead
- Hagerstown: Strong lead
- Baile: Promising
- Bowmansville: Promising
- Chester: Promising
- Duffield: Promising
- Glenelg: Promising
- Holly: Promising
See it on the map
Open a Conestoga spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Conestoga silt loam, 0 to 3 percent slopes, map unit CnA in Lancaster County, Pennsylvania.
- Official Series Description: Conestoga(revised 02/2008), established.
- Taxonomic class: Fine-loamy, mixed, active, mesic Typic Hapludalfs
- Rated with rule version 2026-09-28.1; the method is on the About page.