Colombo soil
Wild-clay potential
Promising
Promising: a loamy layer with some clay typically about 0 to 14 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Colombo soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Colombo spot on the map
Rated from the USDA soil survey record for Colombo clay loam, 1 to 3 percent slopes (Weld County, Colorado, Southern Part) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 31% clay in the fine-earth portion.
- Note Moderate engineering plasticity index (12.5).
- Note Thick enough to investigate (about 14 in (36 cm)).
- Note Typically starts within about 0 in (0 cm) of the surface.
- Note Few rock fragments (about 8% by volume).
- Note USDA reports about 8% calcium carbonate; lime in a clay body deserves testing.
Layer by layer
- Loamy layerH1best layer A clay loam layer about 0 to 14 in down: about 31% clay, moderate plasticity when wet, dark grayish brown when moist. Promising
- Loamy layerH2 A stratified loam to clay loam layer about 14 to 21 in down: about 27% clay, moderate plasticity when wet, pale brown when moist. Possible
- Loamy layerH3 A stratified sand to loam to clay loam layer about 21 to 60 in down: about 27% clay, moderate plasticity when wet, very pale brown when moist. Possible
What it looks like raw
The loamy layer (H1), 0 to 14 in down in the typical profile: dark grayish brown (10YR 4/2), very dark grayish brown (10YR 3/2) moist. Raw colour is not fired colour.
About the soil
- Parent material: stratified, calcareous alluvium.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Colorado, in these survey areas: Weld County, Colorado, Southern Part.
By state: wild clay in Colorado.
USDA, distribution and extent: Northeastern and western Colorado. This series is of moderate extent.
USDA, geographic setting: Colombo soils are on flood plains, terraces, and drainageways. Slopes range from 0 to 6 percent. The soils formed in thick, stratified, calcareous, predominantly medium to moderately fine textured, mixed alluvium. At the type location, the mean annual precipitation is about 12 inches with peak periods of precipitation occurring in the spring and early summer. Mean annual temperature is 48 degrees F, mean summer temperature is 70 degrees F. The frost-free season is about 130 to 160 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Heldt: Strong lead
- Midway: Strong lead
- Nunn: Strong lead
- Renohill: Strong lead
- Ulm: Strong lead
- Weld: Strong lead
- Colby: Promising
- Wiley: Promising
See it on the map
Open a Colombo spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Colombo clay loam, 1 to 3 percent slopes, map unit 20 in Weld County, Colorado, Southern Part.
- Official Series Description: Colombo, established.
- Taxonomic class: Fine-loamy, mixed, mesic Torrifluventic
- Rated with rule version 2026-09-28.1; the method is on the About page.