Chillum soil
Wild-clay potential
Promising
Promising: a clay-enriched layer typically about 12 to 24 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Chillum soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Chillum spot on the map
Rated from the USDA soil survey record for Chillum silt loam, 0 to 8 percent slopes (District of Columbia) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 28% clay in the fine-earth portion.
- Note USDA labels this a "Bt2" horizon: a subsoil layer where clay has accumulated.
- Note Moderate engineering plasticity index (12).
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 12 in (31 cm)).
- Note Typically starts within about 12 in (30 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- TopsoilA A silt loam layer about 0 to 2 in down: about 8% clay, low plasticity when wet, very dark grayish brown when moist. Weak indication
- Sandy layerE A gravelly loam layer about 2 to 9 in down: about 13% clay, low plasticity when wet. Weak indication
- Clay subsoilBt1 A gravelly loam layer about 9 to 12 in down: about 26% clay, moderate plasticity when wet, brown when moist. Weak indication
- Clay subsoilBt2best layer A clay loam layer about 12 to 24 in down: about 28% clay, moderate plasticity when wet, strong brown when moist. Promising
- Sandy layer2BC A loamy sand layer about 24 to 34 in down: about 5% clay, low plasticity when wet, pale brown when moist. Weak indication
- Loamy layer3C A gravelly silty clay loam layer about 34 to 72 in down: about 29% clay, moderate plasticity when wet, pale brown when moist. Possible
What it looks like raw
The clay subsoil (Bt2), 12 to 24 in down in the typical profile: strong brown (7.5YR 5/6); silty clay loam; firm; moderately sticky, moderately plastic. Raw colour is not fired colour.
About the soil
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-silty.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 20 map units in District of Columbia, Maryland, in these survey areas: Baltimore County, Maryland; Cecil County, Maryland; District of Columbia; Harford County Area, Maryland; Prince George's County, Maryland.
By state: wild clay in District of Columbia,wild clay in Maryland.
USDA, geographic setting: Landscape: Coastal Plain
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Christiana: Strong lead
- Montalto: Strong lead
- Watchung: Strong lead
- Lenni: Strong lead
- Benevola: Strong lead
- Cumberstone: Strong lead
- Dunning: Strong lead
- Howell: Strong lead
See it on the map
Open a Chillum spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 100%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Chillum silt loam, 0 to 8 percent slopes, map unit CcB in District of Columbia.
- Official Series Description: Chillum(revised 11/2015), established.
- Taxonomic class: Fine-silty, mixed, semiactive, mesic Typic Hapludults
- Rated with rule version 2026-09-28.1; the method is on the About page.