Cashmere soil
Wild-clay potential
Weak indication
Weak indication: no layer of Cashmere shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Cashmere soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Cashmere spot on the map
Rated from the USDA soil survey record for Cashmere fine sandy loam, 3 to 8 percent slopes (Douglas County, Washington) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Too little clay to be a clay body on its own: about 8% clay.
- Lowers the potential Low engineering plasticity index (2.5): little plastic behavior expected when wet.
- Lowers the potential The official series description calls the wet soil nonsticky and nonplastic.
- Note Thick enough to investigate (about 36 in (91 cm)).
- Note Typically starts about 24 in (61 cm) down; expect real digging or look for cuts and banks.
- Note Few rock fragments (about 9% by volume).
Layer by layer
- Sandy layerH1 A fine sandy loam layer about 0 to 11 in down: about 8% clay, low plasticity when wet, grayish brown when moist. Weak indication
- Sandy layerH2 A fine sandy loam layer about 11 to 24 in down: about 9% clay, low plasticity when wet, brown when moist. Weak indication
- Sandy layerH3best layer A fine sandy loam layer about 24 to 60 in down: about 8% clay, low plasticity when wet, pale brown when moist. Weak indication
What it looks like raw
The sandy layer (H3), 24 to 60 in down in the typical profile: pale brown (10YR 6/3), brown (10YR 5/3) moist; soft, very friable, nonsticky and nonplastic. Raw colour is not fired colour.
About the soil
- Parent material: glaciofluvial deposits.
- USDA family mineralogy: mixed.
- USDA family particle-size class: coarse-loamy.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 5 map units in Idaho, Washington, in these survey areas: Ada County, Idaho; Douglas County, Washington.
By state: wild clay in Idaho,wild clay in Washington.
USDA, distribution and extent: North-central Washington and east-central Idaho; MLRA 7, 8 and 11. The soils are of moderate extent.
USDA, geographic setting: Cashmere soils are on terraces and terrace escarpments. Slope ranges from 0 to 65 percent. The soils formed in glaciofluvial material and alluvium mixed with loess in the surface. Elevations are 700 to 3,000 feet. They occur in a cool, dry semiarid climate; mean annual precipitation is 8 to 12 inches, mean January temperature is 22 degrees F., mean July temperature is 73 degrees F., mean annual temperature is 49 degrees F., and frost-free period is 140 to 195 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Aldape: Strong lead
- Aradaran: Strong lead
- Bowns: Strong lead
- Breadloaf: Strong lead
- Brent: Strong lead
- Castlerock: Strong lead
- Catchell: Strong lead
- Chardoton: Strong lead
See it on the map
Open a Cashmere spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Cashmere fine sandy loam, 3 to 8 percent slopes, map unit 80 in Douglas County, Washington.
- Official Series Description: Cashmere(revised 09/2007), established.
- Taxonomic class: Coarse-loamy, mixed, superactive, mesic Aridic Haploxerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.