Bucks soil
Wild-clay potential
Promising
Promising: a clay-enriched layer typically about 6 to 30 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Bucks soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Bucks silt loam, 3 to 8 percent slopes (Lebanon County, Pennsylvania) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 28% clay in the fine-earth portion.
- Note USDA labels this a "Bt" horizon: a subsoil layer where clay has accumulated.
- Note Moderate engineering plasticity index (9).
- Note Thick enough to investigate (about 24 in (61 cm)).
- Note Typically starts within about 6 in (15 cm) of the surface.
- Note Few rock fragments (about 14% by volume).
Layer by layer
- TopsoilAp A silt loam layer about 0 to 6 in down: about 18% clay, low plasticity when wet, dark yellowish brown when moist. Weak indication
- Clay subsoilBtbest layer A silty clay loam layer about 6 to 30 in down: about 28% clay, moderate plasticity when wet, reddish brown when moist. Promising
- Loamy layerC A very gravelly silty clay loam layer about 30 to 52 in down: about 28% clay, low plasticity when wet, dark reddish brown when moist. Weak indication
- BedrockR Bedrock about 52 to 56 in down: no clay layer to dig. Weak indication
What it looks like raw
The clay subsoil (Bt), 6 to 30 in down in the typical profile: reddish brown (5YR 4/4); friable. Raw colour is not fired colour.
About the soil
- Parent material: silt mantle over residuum weathered from sandstone and siltstone.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: well drained.
- Lithic bedrock typically about 52 in (132 cm) down.
Where it is mapped
Seen on the map as the most common soil in 6 map units in Pennsylvania, in these survey areas: Lancaster County, Pennsylvania; Lebanon County, Pennsylvania.
By state: wild clay in Pennsylvania.
USDA, distribution and extent: New Jersey, Pennsylvania, and Central Maryland. The Bucks soils are of moderate extent.
USDA, geographic setting: Bucks soils are on upland divides and rolling slopes. They formed in a silty mantle and residuum weathered from red shale but may include brownish shale or a few layers of siltstone or fine-grained sandstone. Average annual temperature ranges from 50 to 55 degrees F.; and mean annual precipitation from 40 to 48 inches. Frost free period ranges from 160 to 190 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Hagerstown: Strong lead
- Watchung: Strong lead
- Bowmansville: Promising
- Chester: Promising
- Duffield: Promising
- Holly: Promising
- Joanna: Promising
- Lindside: Promising
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Bucks silt loam, 3 to 8 percent slopes, map unit ByB in Lebanon County, Pennsylvania.
- Official Series Description: Bucks(revised 12/2003), established.
- Taxonomic class: Fine-loamy, mixed, active, mesic Typic Hapludults
- Rated with rule version 2026-09-28.1; the method is on the About page.