Blocktown soil
Wild-clay potential
Weak indication
Weak indication: no layer of Blocktown shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Blocktown soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Blocktown spot on the map
Rated from the USDA soil survey record for Blocktown-Yellowbottom complex, 15 to 25 percent slopes (Culpeper County, Virginia) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Bedrock or unweathered rock, not a soil layer to dig for clay.
Layer by layer
- Sandy layerH1 A gravelly silt loam layer about 0 to 3 in down: about 15% clay, moderate plasticity when wet, yellowish red when moist. Weak indication
- Loamy layerH2 An extremely gravelly loam layer about 3 to 14 in down: about 20% clay, moderate plasticity when wet, red when moist. Weak indication
- BedrockH3best layer Bedrock about 14 to 27 in down: no clay layer to dig. Weak indication
- BedrockH4 Bedrock about 27 to 37 in down: no clay layer to dig. Weak indication
What it looks like raw
The bedrock (H3), 14 to 27 in down in the typical profile: variegated red (2.5YR 4/6), and yellowish red (5YR 5/6); firm. Raw colour is not fired colour.
About the soil
- Parent material: residuum weathered from phyllite and/or residuum weathered from schist.
- USDA family mineralogy: mixed.
- USDA family particle-size class: loamy-skeletal.
- Drainage: well drained.
- Lithic bedrock typically about 27 in (69 cm) down.
Where it is mapped
Seen on the map as the most common soil in 2 map units in Virginia, in these survey areas: Culpeper County, Virginia.
By state: wild clay in Virginia.
USDA, distribution and extent: The Piedmont Plateau of Maryland and possibly Pennsylvania and Virginia. The series is of moderate extent.
USDA, geographic setting: Blocktown soils are on narrow ridge crests and side slopes of dissected landscapes in the Piedmont Plateau. Slopes range from 0 to 60 percent. The soils formed in residuum of weathered beds of phyllite. The mean annual temperature ranges from 50 to 57 degrees F, and mean annual precipitation ranges from 38 to 44 inches.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Flume: Strong lead
- Germanna: Strong lead
- Penhook: Strong lead
- Yellowbottom: Strong lead
- Elsinboro: Promising
- Happyland: Promising
- Codorus: Possible
- Comus: Weak indication
See it on the map
Open a Blocktown spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 45%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Blocktown-Yellowbottom complex, 15 to 25 percent slopes, map unit 3D in Culpeper County, Virginia.
- Official Series Description: Blocktown(revised 01/2006), established.
- Taxonomic class: Loamy-skeletal, mixed, semiactive, mesic, shallow Typic Hapludults
- Rated with rule version 2026-09-28.1; the method is on the About page.