Yellowbottom soil
Wild-clay potential
Strong lead
Strong lead: a clayey layer typically about 7 to 35 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Yellowbottom soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Yellowbottom spot on the map
Rated from the USDA soil survey record for Yellowbottom loam, 2 to 7 percent slopes (Culpeper County, Virginia) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 50% clay in the fine-earth portion.
- Raises the potential High engineering plasticity index (22): USDA's estimate suggests plastic behavior when wet.
- Note Thick enough to investigate (about 28 in (71 cm)).
- Note Typically starts within about 7 in (18 cm) of the surface.
- Note Few rock fragments (about 0% by volume).
Layer by layer
- Sandy layerH1 A loam layer about 0 to 7 in down: about 15% clay, low plasticity when wet, light yellowish brown when moist. Weak indication
- Clay-rich layerH2best layer A clay layer about 7 to 35 in down: about 50% clay, high plasticity when wet, strong brown when moist. Strong lead
- Sandy layerH3 A loam layer about 35 to 84 in down: about 15% clay, low plasticity when wet, brownish yellow when moist. Weak indication
What it looks like raw
The clay-rich layer (H2), 7 to 35 in down in the typical profile: strong brown (7.5YR 5/6). Raw colour is not fired colour.
About the soil
- Parent material: residuum weathered from phyllite and/or residuum weathered from schist.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 6 map units in Virginia, in these survey areas: Culpeper County, Virginia; Fauquier County, Virginia.
By state: wild clay in Virginia.
USDA, distribution and extent: Virginia. The series is of moderate extent.
USDA, geographic setting: Summits and backslopes on ridges and hills in the mesic Southern Piedmont. Slope ranges from 0 to 15 percent. Soils form in residuum from sericite schist, phyllonite, phyllite, and metamonzagranite. Mean annual precipitation ranges from 36 to 45 inches and mean annual temperature ranges from 53 to 56 degrees F.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Penhook: Strong lead
- Albano: Strong lead
- Appling: Strong lead
- Cecil: Strong lead
- Clover: Strong lead
- Dulles: Strong lead
- Fletcherville: Strong lead
- Flume: Strong lead
See it on the map
Open a Yellowbottom spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Yellowbottom loam, 2 to 7 percent slopes, map unit 55B in Culpeper County, Virginia.
- Official Series Description: Yellowbottom(revised 10/2021), established.
- Taxonomic class: Fine, mixed, semiactive, mesic Typic Hapludults
- Rated with rule version 2026-09-28.1; the method is on the About page.