Barbermill soil
Wild-clay potential
Promising
Promising: a clay-enriched layer typically about 7 to 9 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Barbermill soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Barbermill spot on the map
Rated from the USDA soil survey record for Barbermill soils-Breadloaf complex, 25 to 90 percent slopes (Ada County, Idaho) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 38% clay in the fine-earth portion.
- Note USDA labels this a "Bt2" horizon: a subsoil layer where clay has accumulated.
- Raises the potential High engineering plasticity index (27): USDA's estimate suggests plastic behavior when wet.
- Raises the potential The official series description calls the wet soil very sticky and very plastic (a field observation, not a ceramic test).
- Lowers the potential Thin layer (about 2 in (6 cm)), hard to collect in quantity.
- Note Typically starts within about 7 in (18 cm) of the surface.
- Note Few rock fragments (about 10% by volume).
- Note High shrink-swell (linear extensibility about 7.5%): often very plastic, and prone to cracking as it dries.
- Note Engineering class CH: a clay of high plasticity in the Unified system.
Layer by layer
- TopsoilA A very cobbly sandy loam layer about 0 to 3 in down: about 18% clay, moderate plasticity when wet, brown when moist. Weak indication
- Clay subsoilBt1 A clay loam layer about 3 to 7 in down: about 32% clay, high plasticity when wet, yellowish brown when moist. Possible
- Clay subsoilBt2best layer A clay loam layer about 7 to 9 in down: about 38% clay, high plasticity when wet, yellowish brown when moist. Promising
- BedrockCr Bedrock about 9 to 20 in down: no clay layer to dig. Weak indication
What it looks like raw
The clay subsoil (Bt2), 7 to 9 in down in the typical profile: yellowish brown (10YR 5/4), very dark yellowish brown (10YR 4/4) moist; very hard, very firm, very sticky and very plastic. Raw colour is not fired colour.
About the soil
- Parent material: clayey lacustrine deposits.
- USDA family mineralogy: mixed.
- USDA family particle-size class: loamy.
- Drainage: well drained.
- Paralithic bedrock typically about 9 in (24 cm) down.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Idaho, in these survey areas: Ada County, Idaho.
By state: wild clay in Idaho.
USDA, distribution and extent: Southwestern Idaho and Central Oregon. MLRA 10. This series is not extensive.
USDA, geographic setting: These soils are on hill shoulders and backslopes. They formed in alluvium from volcaniclastic sediments consisting of tuffaceous sand and gravel. Slopes are 2 to 90 percent. Elevations range from 1,800 to 3,900 feet. The mean annual precipitation is 9 to 16 inches and the mean annual temperature is 45 to 52 degrees F. The frost-free period is 90 to 150 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Aldape: Strong lead
- Aradaran: Strong lead
- Bowns: Strong lead
- Breadloaf: Strong lead
- Brent: Strong lead
- Castlerock: Strong lead
- Catchell: Strong lead
- Chardoton: Strong lead
See it on the map
Open a Barbermill spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 50%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Barbermill soils-Breadloaf complex, 25 to 90 percent slopes, map unit 3079 in Ada County, Idaho.
- Official Series Description: Barbermill(revised 02/2006), established.
- Taxonomic class: Clayey, smectitic, mesic, shallow Aridic Argixerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.