Alden soil
Wild-clay potential
Possible
Possible: a loamy layer with some clay typically about 36 to 72 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Alden soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Alden mucky silt loam (Otsego County, New York) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 22% clay. It may need settling or refining to become a clay body.
- Note Moderate engineering plasticity index (10).
- Note Thick enough to investigate (about 36 in (92 cm)).
- Note Typically starts about 36 in (91 cm) down; expect real digging or look for cuts and banks.
- Note Few rock fragments (about 10% by volume).
Layer by layer
- Loamy layerH1 A mucky silt loam layer about 0 to 8 in down: about 22% clay, moderate plasticity when wet, black when moist. Possible
- Loamy layerH2 A very fine sandy loam layer about 8 to 25 in down: about 18% clay, moderate plasticity when wet, dark gray when moist. Possible
- Loamy layerC A loam layer about 25 to 36 in down: about 22% clay, moderate plasticity when wet, grayish brown when moist. Possible
- Loamy layer2Cbest layer A silt loam layer about 36 to 72 in down: about 22% clay, moderate plasticity when wet, grayish brown when moist. Possible
What it looks like raw
The loamy layer (2C), 36 to 72 in down in the typical profile: grayish brown (10YR 5/2); firm. Raw colour is not fired colour.
About the soil
- Parent material: a silty mantle of local deposition overlying loamy till.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: very poorly drained.
- Rated hydric (wetland) soil; often saturated and protected.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in New York, in these survey areas: Otsego County, New York.
By state: wild clay in New York.
USDA, distribution and extent: Western Connecticut, northern New Jersey and Allegheny Plateau of New York and northern Pennsylvania. MLRA's 101, 139, 140, 141, and 144A. The series is extensive.
USDA, geographic setting: Alden soils are nearly level and are in depressions on till plains. Slope ranges from 0 to 8 percent. The soils formed in loamy till with a 45 to 100 centimeter thick mantle of local depositional material. Mean annual temperature ranges from 7 to 9.5 degrees C; mean annual precipitation ranges from 900 to 1350 centimeters; and mean annual frost-free period ranges from 140 to 180 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Canandaigua: Possible
- Bath: Weak indication
- Castile: Weak indication
- Chenango: Weak indication
- Chippewa: Weak indication
- Hamplain: Weak indication
- Hawksnest: Weak indication
- Lewbath: Weak indication
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 70%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Alden mucky silt loam, map unit Ad in Otsego County, New York.
- Official Series Description: Alden(revised 04/2025), established.
- Taxonomic class: Fine-loamy, mixed, active, nonacid, mesic Mollic Endoaquepts
- Rated with rule version 2026-09-28.1; the method is on the About page.