Ackmen soil
Wild-clay potential
Possible
Possible: a loamy layer with some clay typically about 32 to 60 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Ackmen soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Ackmen loam, 1 to 3 percent slopes (Davis-Weber Area, Utah) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 20% clay. It may need settling or refining to become a clay body.
- Note Moderate engineering plasticity index (7.5).
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 28 in (71 cm)).
- Note Typically starts about 32 in (81 cm) down; expect real digging or look for cuts and banks.
- Missing data Rock fragment content is not reported.
Layer by layer
- TopsoilAp A loam layer about 0 to 6 in down: about 20% clay, moderate plasticity when wet, dark grayish brown when moist. Weak indication
- TopsoilAC A loam layer about 6 to 32 in down: about 20% clay, moderate plasticity when wet, brown when moist. Possible
- Loamy layerCbest layer A loam layer about 32 to 60 in down: about 20% clay, moderate plasticity when wet, brown when moist. Possible
What it looks like raw
The loamy layer (C), 32 to 60 in down in the typical profile: brown (7.5YR 4/2), dark brown (7.5YR 3/2) moist; very hard, friable, moderately sticky and moderately plastic. Raw colour is not fired colour.
About the soil
- Parent material: slope alluvium.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 4 map units in Utah, in these survey areas: Davis-Weber Area, Utah.
By state: wild clay in Utah.
USDA, distribution and extent: Southeast Utah and southwest Colorado. LRR D, MLRA 36 and 39. The series is of moderate extent.
USDA, geographic setting: Parent material: alluvium derived from intrusive igneous rocks, mixed sedimentary rocks, and surface soil material eroded from adjoining uplands. Landform: flood plains, drainageways, valleys, draws, and alluvial fans Slopes: 0 to 20 percent Elevation: 6,000 to 7,500 feet Mean annual temperature: 46 to 52 degrees F Mean annual precipitation: 13 to 18 inches Precipitation is fairly evenly distributed throughout the year with July and August being slightly wetter and June being slightly dryer. Frost-free period: 100 to 150 days
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Abbott: Strong lead
- Airport: Strong lead
- Eimarsh: Strong lead
- Kirkham: Strong lead
- Payson: Strong lead
- Pintailake: Strong lead
- Saltair: Strong lead
- Woods Cross: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 100%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Ackmen loam, 1 to 3 percent slopes, map unit AbB in Davis-Weber Area, Utah.
- Official Series Description: Ackmen(revised 12/2003), established.
- Taxonomic class: Fine-silty, mixed, superactive, mesic Cumulic Haplustolls
- Rated with rule version 2026-09-28.1; the method is on the About page.