Abbottstown soil
Wild-clay potential
Possible
Possible: a clay-enriched layer typically about 10 to 20 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Abbottstown soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Abbottstown spot on the map
Rated from the USDA soil survey record for Abbottstown silt loam, 0 to 3 percent slopes (Montgomery County, Pennsylvania) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 25% clay. It may need settling or refining to become a clay body.
- Note USDA labels this a "Bt" horizon: a subsoil layer where clay has accumulated.
- Note Moderate engineering plasticity index (17).
- Note The official series description calls the wet soil slightly sticky and slightly plastic.
- Note Moderate thickness (about 10 in (26 cm)).
- Note Typically starts within about 10 in (25 cm) of the surface.
- Note Few rock fragments (about 11% by volume).
Layer by layer
- TopsoilAp A silt loam layer about 0 to 10 in down: about 18% clay, moderate plasticity when wet, dark reddish gray when moist. Weak indication
- Clay subsoilBtbest layer A silt loam layer about 10 to 20 in down: about 25% clay, moderate plasticity when wet, reddish brown when moist. Possible
- Loamy layerBx A channery silt loam layer about 20 to 39 in down: about 21% clay, moderate plasticity when wet, weak red when moist. Weak indication
- Loamy layerBCg A channery silt loam layer about 39 to 48 in down: about 25% clay, moderate plasticity when wet, weak red when moist. Weak indication
- BedrockR Bedrock about 48 to 58 in down: no clay layer to dig. Weak indication
What it looks like raw
The clay subsoil (Bt), 10 to 20 in down in the typical profile: reddish brown (5YR 4/4); silt loam; friable, slightly sticky, slightly plastic. Raw colour is not fired colour.
About the soil
- Parent material: acid reddish brown residuum weathered from shale and siltstone.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: somewhat poorly drained.
- Lithic bedrock typically about 48 in (122 cm) down.
Where it is mapped
Seen on the map as the most common soil in 11 map units in Pennsylvania, in these survey areas: Berks County, Pennsylvania; Bucks County, Pennsylvania; Lancaster County, Pennsylvania; Lebanon County, Pennsylvania; Montgomery County, Pennsylvania.
By state: wild clay in Pennsylvania.
USDA, distribution and extent: Northern Piedmont of southeastern Pennsylvania, central New Jersey, and Maryland. The series is of moderate extent.
USDA, geographic setting: Abbottstown soils are on nearly level to sloping concave upland flats, depressions and drainageways. Slopes range from 0 to 15 percent. They formed in residuum weathered from noncalcareous red shale, siltstone, and fine-grain sandstone. Climate is humid and temperate, with mean annual precipitation of 40 to 48 inches; mean annual temperature ranges from 50 to 55 degrees F., and the growing season ranges from 170 to 200 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Hagerstown: Strong lead
- Watchung: Strong lead
- Bowmansville: Promising
- Mount Lucas: Promising
- Readington: Promising
- Rowland: Promising
- Duffield: Promising
- Towhee: Promising
See it on the map
Open a Abbottstown spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Abbottstown silt loam, 0 to 3 percent slopes, map unit AbA in Montgomery County, Pennsylvania.
- Official Series Description: Abbottstown(revised 09/2008), established.
- Taxonomic class: Fine-loamy, mixed, active, mesic Aeric Fragiaqualfs
- Rated with rule version 2026-09-28.1; the method is on the About page.