Stronghurst soil
Wild-clay potential
Promising
Promising: a loamy layer with some clay typically about 11 to 47 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Stronghurst soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Stronghurst spot on the map
Rated from the USDA soil survey record for Stronghurst silt loam, terrace, 0 to 2 percent slopes (Pike County, Illinois) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 31% clay in the fine-earth portion.
- Raises the potential High engineering plasticity index (27.5): USDA's estimate suggests plastic behavior when wet.
- Note Thick enough to investigate (about 36 in (91 cm)).
- Note Typically starts within about 11 in (28 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- Loamy layerH1 A silt loam layer about 0 to 7 in down: about 22% clay, moderate plasticity when wet, dark gray when moist. Possible
- Loamy layerH2 A silt loam layer about 7 to 11 in down: about 22% clay, moderate plasticity when wet, dark grayish brown when moist. Weak indication
- Loamy layerH3best layer A silty clay loam layer about 11 to 47 in down: about 31% clay, high plasticity when wet, pale brown when moist. Promising
- Loamy layerH4 A silt loam layer about 47 to 60 in down: about 24% clay, moderate plasticity when wet, mixed pale brown when moist. Possible
What it looks like raw
The loamy layer (H3), 11 to 47 in down in the typical profile: pale brown (10YR 6/3); friable. Raw colour is not fired colour.
About the soil
- Parent material: loess or other silty material.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-silty.
- Drainage: somewhat poorly drained.
Where it is mapped
Seen on the map as the most common soil in 2 map units in Illinois, in these survey areas: Pike County, Illinois.
By state: wild clay in Illinois.
USDA, distribution and extent: Illinois, Wisconsin, and Iowa. LRR's K and M, MLRAs 95B, 104, 105, 108A, 108B, 108C, and 115C. The extent is moderate (about 60,000 acres correlated to date).
USDA, geographic setting: Stronghurst soils are on nearly level or gently sloping benches and ridges of till plains. Slope gradients range from 0 to 6 percent. The soils formed in loess. The mean annual precipitation ranges from 760 to 1067 mm (30 to 42 inches), mean annual temperature ranges from 7.2 to 11.7 degrees C (45 to 53 degrees F), and frost free period ranges from 140 to 180 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Darwin: Strong lead
- Elco: Strong lead
- Ipava: Strong lead
- Keswick: Strong lead
- Titus: Strong lead
- Ambraw: Promising
- Baylis: Promising
- Beaucoup: Promising
See it on the map
Open a Stronghurst spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Stronghurst silt loam, terrace, 0 to 2 percent slopes, map unit 9278A in Pike County, Illinois.
- Official Series Description: Stronghurst(revised 02/2011), established.
- Taxonomic class: Fine-silty, mixed, superactive, mesic Aeric Endoaqualfs
- Rated with rule version 2026-09-28.1; the method is on the About page.