Ambraw soil
Wild-clay potential
Promising
Promising: a loamy layer with some clay typically about 17 to 43 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Ambraw soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Ambraw clay loam, 0 to 2 percent slopes, frequently flooded, long duration (Pike County, Illinois) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 31% clay in the fine-earth portion.
- Note Moderate engineering plasticity index (17.5).
- Note Thick enough to investigate (about 26 in (67 cm)).
- Note Typically starts within about 17 in (43 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- Loamy layerH1 A clay loam layer about 0 to 17 in down: about 31% clay, moderate plasticity when wet, very dark grayish brown when moist. Promising
- Loamy layerH2best layer A clay loam layer about 17 to 43 in down: about 31% clay, moderate plasticity when wet, dark gray when moist. Promising
- Loamy layerH3 A stratified sand to silty clay loam layer about 43 to 80 in down: about 24% clay, moderate plasticity when wet, dark gray when moist. Possible
What it looks like raw
The loamy layer (H2), 17 to 43 in down in the typical profile: dark gray (N 4/0); firm. Raw colour is not fired colour.
About the soil
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: poorly drained.
- Rated hydric (wetland) soil; often saturated and protected.
Where it is mapped
Seen on the map as the most common soil in 3 map units in Illinois, in these survey areas: Pike County, Illinois.
By state: wild clay in Illinois.
USDA, distribution and extent: Central and southern Illinois, east-central Iowa and Indiana. Series extent is moderate; about 25,000 acres in MLRAs 108A, 113, and 115A.
USDA, geographic setting: Ambraw soils are on flood plains or low terraces of large streams. Slope ranges from 0 to 2 percent. They formed in stratified loamy alluvium. Mean annual air temperature ranges from 45 to 57 degrees F., mean annual precipitation ranges from 29 to 45 inches, frost-free period ranges from 140 to 200 days, and elevation ranges from 340 to 1300 feet above mean sea level.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Darwin: Strong lead
- Elco: Strong lead
- Ipava: Strong lead
- Keswick: Strong lead
- Titus: Strong lead
- Baylis: Promising
- Beaucoup: Promising
- Bethalto: Promising
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 100%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Ambraw clay loam, 0 to 2 percent slopes, frequently flooded, long duration, map unit 3302L in Pike County, Illinois.
- Official Series Description: Ambraw(revised 06/2015), established.
- Taxonomic class: Fine-loamy, mixed, superactive, mesic Fluvaquentic Endoaquolls
- Rated with rule version 2026-09-28.1; the method is on the About page.