Bethalto soil
Wild-clay potential
Promising
Promising: a loamy layer with some clay typically about 14 to 63 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Bethalto soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Bethalto spot on the map
Rated from the USDA soil survey record for Bethalto silt loam, 0 to 2 percent slopes (Pike County, Illinois) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 31% clay in the fine-earth portion.
- Note Moderate engineering plasticity index (15).
- Note Thick enough to investigate (about 49 in (124 cm)).
- Note Typically starts within about 14 in (36 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- Loamy layerH1 A silt loam layer about 0 to 8 in down: about 22% clay, moderate plasticity when wet, very dark grayish brown when moist. Possible
- Loamy layerH2 A silt loam layer about 8 to 14 in down: about 20% clay, moderate plasticity when wet, grayish brown when moist. Possible
- Loamy layerH3best layer A silty clay loam layer about 14 to 63 in down: about 31% clay, moderate plasticity when wet, grayish brown when moist. Promising
- Loamy layerH4 A silt loam layer about 63 to 80 in down: about 22% clay, moderate plasticity when wet, light brownish gray when moist. Weak indication
What it looks like raw
The loamy layer (H3), 14 to 63 in down in the typical profile: grayish brown (10YR 5/2); friable. Raw colour is not fired colour.
About the soil
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-silty.
- Drainage: somewhat poorly drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Illinois, in these survey areas: Pike County, Illinois.
By state: wild clay in Illinois.
USDA, distribution and extent: Southwestern Illinois. Extent is moderate, and mainly in MLRA 115.
USDA, geographic setting: Bethalto soils are on nearly level or gently sloping summits on till plains. They are in areas of transition between prairie grass and deciduous forest. Slope gradients typically are between 1 and 3 percent and range from 0 to 5 percent. These soils formed in loess. Mean annual temperature is 54 to 57 degrees F., mean annual precipitation is 36 to 40 inches, frost-free period is 170 to 200 days, and elevation is 400 to 800 feet above sea level.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Darwin: Strong lead
- Elco: Strong lead
- Ipava: Strong lead
- Keswick: Strong lead
- Titus: Strong lead
- Ambraw: Promising
- Baylis: Promising
- Beaucoup: Promising
See it on the map
Open a Bethalto spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Bethalto silt loam, 0 to 2 percent slopes, map unit 90A in Pike County, Illinois.
- Official Series Description: Bethalto, established.
- Taxonomic class: Fine-silty, mixed, superactive, mesic Udollic Endoaqualfs
- Rated with rule version 2026-09-28.1; the method is on the About page.