Spofford soil
Wild-clay potential
Promising
Promising: a loamy layer with some clay typically about 12 to 23 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Spofford soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Spofford spot on the map
Rated from the USDA soil survey record for Spofford silt loam, 0 to 15 percent slopes (Whitman County, Washington) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 28% clay in the fine-earth portion.
- Note Moderate engineering plasticity index (17.5).
- Note The official series description calls the wet soil slightly sticky and slightly plastic.
- Note Moderate thickness (about 11 in (28 cm)).
- Note Typically starts within about 12 in (30 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- Sandy layerH1 A silt loam layer about 0 to 12 in down: about 13% clay, low plasticity when wet, grayish brown when moist. Weak indication
- Loamy layerH2best layer A silty clay loam layer about 12 to 23 in down: about 28% clay, moderate plasticity when wet, dark grayish brown when moist. Promising
- Loamy layerH3 A silt loam layer about 23 to 60 in down: about 22% clay, moderate plasticity when wet, light gray when moist. Weak indication
What it looks like raw
The loamy layer (H2), 12 to 23 in down in the typical profile: dark grayish brown (10YR 4/2), dark brown (10YR 3/3) moist; very hard, very firm, slightly sticky and slightly plastic. Raw colour is not fired colour.
About the soil
- Parent material: loess.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-silty.
- Drainage: moderately well drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Washington, in these survey areas: Whitman County, Washington.
By state: wild clay in Washington.
USDA, distribution and extent: Southeastern and Northcentral Washington. The series is of small extent.
USDA, geographic setting: Spofford soils typically occur at the base of slopes, in depressions or basins, or concave areas on sloping uplands at an elevation of 500 to 3,400 feet. Individual bodies range in size mainly from 1/4 acre to about 5 acres. The soils formed in loess. Summers are warm and dry, and winters are cool and moist. Average annual precipitation is mostly 12 to 15 inches, but some is as high as 20 inches. Average January temperature is 29 to 32 degrees F, average July temperature is 69 to 73 degrees F, and mean annual temperature is 47 to 52 degrees F. Frost-free season is 110 to 165 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Garfield: Strong lead
- Konert: Strong lead
- Latah: Strong lead
- Tilma: Strong lead
- Caldwell: Promising
- Naff: Promising
- Thatuna: Promising
- Almota: Possible
See it on the map
Open a Spofford spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 100%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Spofford silt loam, 0 to 15 percent slopes, map unit 93 in Whitman County, Washington.
- Official Series Description: Spofford, established.
- Taxonomic class: Fine-silty, mixed, superactive, mesic Typic Natrixerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.