Slickpoo soil
Wild-clay potential
Promising
Promising: a clay-enriched layer typically about 12 to 22 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Slickpoo soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Slickpoo spot on the map
Rated from the USDA soil survey record for Slickpoo silt loam, 5 to 15 percent slopes (Lewis and Nez Perce Counties, Idaho) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 27% clay in the fine-earth portion.
- Note USDA labels this a "Bt" horizon: a subsoil layer where clay has accumulated.
- Note Moderate engineering plasticity index (19).
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Moderate thickness (about 10 in (26 cm)).
- Note Typically starts within about 12 in (30 cm) of the surface.
- Note Few rock fragments (about 8% by volume).
Layer by layer
- TopsoilA A silt loam layer about 0 to 12 in down: about 22% clay, moderate plasticity when wet, dark grayish brown when moist. Weak indication
- Clay subsoilBtbest layer A silty clay loam layer about 12 to 22 in down: about 27% clay, moderate plasticity when wet, yellowish brown when moist. Promising
- Clay subsoil2Btk A cobbly silty clay loam layer about 22 to 37 in down: about 32% clay, high plasticity when wet, yellowish brown when moist. Possible
- Loamy layer2Bk A very cobbly silt loam layer about 37 to 45 in down: about 24% clay, moderate plasticity when wet, light gray when moist. Weak indication
- Bedrock2R Bedrock about 45 to 55 in down: no clay layer to dig. Weak indication
What it looks like raw
The clay subsoil (Bt), 12 to 22 in down in the typical profile: yellowish brown (10YR 5/4), dark brown (10YR 3/3) moist; hard, friable, sticky and plastic. Raw colour is not fired colour.
About the soil
- Parent material: loess over colluvium over bedrock derived from basalt.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: well drained.
- Lithic bedrock typically about 45 in (114 cm) down.
Where it is mapped
Seen on the map as the most common soil in 2 map units in Idaho, in these survey areas: Lewis and Nez Perce Counties, Idaho.
By state: wild clay in Idaho.
USDA, distribution and extent: This soil is of small extent.
USDA, geographic setting: Slickpoo soils are on south and west facing sideslopes on hills on basalt plateaus. Slopes range 5 to 25 percent. These soils formed in loess and material weathered from basalt at elevations of 1,600 and 2,900 feet. The average annual temperature ranges from 49 to 52 degrees F., with an average annual precipitation of 15 to 18 inches. The average frost-free period is from 140 to 180 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Cramont: Strong lead
- Taney: Strong lead
- Caldwell: Promising
- Latahco: Promising
- Naff: Promising
- Thatuna: Promising
- Almota: Possible
- Athena: Possible
See it on the map
Open a Slickpoo spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Slickpoo silt loam, 5 to 15 percent slopes, map unit 116 in Lewis and Nez Perce Counties, Idaho.
- Official Series Description: Slickpoo(revised 10/2002), established.
- Taxonomic class: Fine-loamy, mixed, superactive, mesic Calcic Pachic Argixerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.