Raddle soil
Wild-clay potential
Possible
Possible: a loamy layer with some clay typically about 15 to 60 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Raddle soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Raddle silt loam, 2 to 5 percent slopes, rarely flooded (Pike County, Illinois) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 21% clay. It may need settling or refining to become a clay body.
- Note Moderate engineering plasticity index (14).
- Note Thick enough to investigate (about 45 in (114 cm)).
- Note Typically starts within about 15 in (38 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- Loamy layerH1 A silt loam layer about 0 to 15 in down: about 18% clay, moderate plasticity when wet, very dark grayish brown when moist. Possible
- Loamy layerH2best layer A silt loam layer about 15 to 60 in down: about 21% clay, moderate plasticity when wet, dark yellowish brown when moist. Possible
What it looks like raw
The loamy layer (H2), 15 to 60 in down in the typical profile: dark yellowish brown (10YR 4/4); very friable. Raw colour is not fired colour.
About the soil
- Parent material: local silty alluvium.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-silty.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Illinois, in these survey areas: Pike County, Illinois.
By state: wild clay in Illinois.
USDA, distribution and extent: Illinois and Iowa along the major river valleys. Extent is moderate, and mainly in MLRA(s) 104, 108, 114, and 115.
USDA, geographic setting: Raddle soils are on footslopes below loess bluffs and on stream terraces. They formed in silty local alluvium. Slopes commonly are 0 to 3 percent but range to as steep as 10 percent. Mean annual temperature is 49 to 57 degrees F., mean annual precipitation is 32 to 44 inches, frost-free period is 160 to 200 days, and elevation is 340 to 550 feet above mean sea level.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Darwin: Strong lead
- Elco: Strong lead
- Ipava: Strong lead
- Keswick: Strong lead
- Titus: Strong lead
- Ambraw: Promising
- Baylis: Promising
- Beaucoup: Promising
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Raddle silt loam, 2 to 5 percent slopes, rarely flooded, map unit 7430B in Pike County, Illinois.
- Official Series Description: Raddle(revised 01/2000), established.
- Taxonomic class: Fine-silty, mixed, superactive, mesic Typic Hapludolls
- Rated with rule version 2026-09-28.1; the method is on the About page.