Orion soil
Wild-clay potential
Weak indication
Weak indication: no layer of Orion shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Orion soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Orion silt loam, 0 to 2 percent slopes, frequently flooded (Pike County, Illinois) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 20% clay. It may need settling or refining to become a clay body.
- Note Moderate engineering plasticity index (13).
- Note Thick enough to investigate (about 38 in (96 cm)).
- Note Typically starts within about 22 in (56 cm) of the surface.
- Missing data Rock fragment content is not reported.
- Lowers the potential Surface layer with about 5.5% organic matter; roots and organics complicate use.
Layer by layer
- TopsoilAp A silt loam layer about 0 to 7 in down: about 14% clay, moderate plasticity when wet, dark grayish brown when moist. Weak indication
- Sandy layerC A stratified very fine sand to silt loam layer about 7 to 22 in down: about 14% clay, moderate plasticity when wet, stratified brown when moist. Weak indication
- TopsoilAbbest layer A silt loam layer about 22 to 60 in down: about 20% clay, moderate plasticity when wet, black when moist. Weak indication
- Sandy layerCg A stratified sand to silt loam layer about 60 to 79 in down: about 14% clay, moderate plasticity when wet, light brownish gray when moist. Weak indication
What it looks like raw
The topsoil (Ab), 22 to 60 in down in the typical profile: black (10YR 2/1); silt loam; friable. Raw colour is not fired colour.
About the soil
- Parent material: recent alluvium over a buried soil in older deposits of alluvium.
- USDA family mineralogy: mixed.
- USDA family particle-size class: coarse-silty.
- Drainage: somewhat poorly drained.
Where it is mapped
Seen on the map as the most common soil in 2 map units in Illinois, in these survey areas: Pike County, Illinois.
By state: wild clay in Illinois.
USDA, distribution and extent: Physiographic Division--Interior Plains
USDA, geographic setting: Parent material--50 to 150 centimeters of recently deposited, stratified, alluvium overlying a buried soil
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Darwin: Strong lead
- Elco: Strong lead
- Ipava: Strong lead
- Keswick: Strong lead
- Titus: Strong lead
- Ambraw: Promising
- Baylis: Promising
- Beaucoup: Promising
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 95%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Orion silt loam, 0 to 2 percent slopes, frequently flooded, map unit 3415A in Pike County, Illinois.
- Official Series Description: Orion(revised 10/2007), established.
- Taxonomic class: Coarse-silty, mixed, superactive, nonacid, mesic Aquic Udifluvents
- Rated with rule version 2026-09-28.1; the method is on the About page.