Lickskillet soil
Wild-clay potential
Weak indication
Weak indication: no layer of Lickskillet shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Lickskillet soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Lickskillet spot on the map
Rated from the USDA soil survey record for Lickskillet-Rock outcrop complex, 45 to 80 percent slopes (Upper Deschutes River Area, Oregon, Parts of Deschutes, Jefferson, and Klamath Counties) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Bedrock or unweathered rock, not a soil layer to dig for clay.
Layer by layer
- Sandy layerH1 A very stony sandy loam layer about 0 to 7 in down: about 8% clay, low plasticity when wet, brown when moist. Weak indication
- Sandy layerH2 A very cobbly sandy loam layer about 7 to 14 in down: about 15% clay, low plasticity when wet, brown when moist. Weak indication
- BedrockH3best layer Unweathered bedrock about 14 to 24 in down: no clay layer to dig. Weak indication
What it looks like raw
The bedrock (H3), 14 to 24 in down in the typical profile: brown (7.5YR 5/4) dry, dark brown (7.5YR 3/4) moist; hard, firm, moderately sticky and moderately plastic. Raw colour is not fired colour.
About the soil
- Parent material: colluvium derived from volcanic rock.
- USDA family mineralogy: mixed.
- USDA family particle-size class: loamy-skeletal.
- Drainage: well drained.
- Lithic bedrock typically about 14 in (36 cm) down.
Where it is mapped
Seen on the map as the most common soil in 11 map units in Idaho, Oregon, Washington, in these survey areas: Asotin County Area, Washington (Asotin and Garfield Counties); Garfield County Area, Washington; Lewis and Nez Perce Counties, Idaho; Upper Deschutes River Area, Oregon, Parts of Deschutes, Jefferson, and Klamath Counties.
By state: wild clay in Idaho,wild clay in Oregon,wild clay in Washington.
USDA, distribution and extent: Distribution--Eastern Oregon, eastern and north-central Washington, southern Idaho; MLRAs 6, 8, 10, and 43C
USDA, geographic setting: Elevation--60 to 1375 m
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Cloverland: Strong lead
- Cramont: Strong lead
- Moonbeam: Strong lead
- Swalesilver: Strong lead
- Taney: Strong lead
- Caldwell: Promising
- Latahco: Promising
- Naff: Promising
See it on the map
Open a Lickskillet spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 60%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Lickskillet-Rock outcrop complex, 45 to 80 percent slopes, map unit 81F in Upper Deschutes River Area, Oregon, Parts of Deschutes, Jefferson, and Klamath Counties.
- Official Series Description: Lickskillet(revised 02/2025), established.
- Taxonomic class: Loamy-skeletal, mixed, superactive, mesic Aridic Lithic Haploxerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.