Hartland soil
Wild-clay potential
Weak indication
Weak indication: no layer of Hartland shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Hartland soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Hartland spot on the map
Rated from the USDA soil survey record for Hartland very fine sandy loam, 6 to 12 percent slopes (Chittenden County, Vermont) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Too little clay to be a clay body on its own: about 10% clay.
- Lowers the potential Low engineering plasticity index (3): little plastic behavior expected when wet.
- Note Thick enough to investigate (about 42 in (107 cm)).
- Note Typically starts within about 23 in (58 cm) of the surface.
- Note Few rock fragments (about 2% by volume).
Layer by layer
- Sandy layerH1 A very fine sandy loam layer about 0 to 1 in down: about 7% clay, low plasticity when wet, dark grayish brown when moist. Weak indication
- Sandy layerH2 A very fine sandy loam layer about 1 to 23 in down: about 7% clay, low plasticity when wet, olive brown when moist. Weak indication
- Sandy layerH3best layer A very fine sandy loam layer about 23 to 65 in down: about 10% clay, low plasticity when wet, silt and yellowish brown when moist. Weak indication
What it looks like raw
The sandy layer (H3), 23 to 65 in down in the typical profile: silt and yellowish brown (10YR 5/6); friable. Raw colour is not fired colour.
About the soil
- Parent material: coarse-silty glaciolacustrine deposits.
- USDA family mineralogy: mixed.
- USDA family particle-size class: coarse-silty.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 2 map units in Maine, Vermont, in these survey areas: Chittenden County, Vermont; Kennebec County, Maine.
By state: wild clay in Maine,wild clay in Vermont.
USDA, distribution and extent: Vermont and eastern New York and possibly Maine, Massachusetts, and New Hampshire. MLRA 101, 141, 142, 143, 144A, 144B, and 145. The series is of moderate extent.
USDA, geographic setting: The Hartland soils are nearly level to very steep soils on terraces and glacial lake plains. They are on broad plains and on the tops and side slopes of hills, ridges, and knolls. Slope ranges from 0 to 50 percent. The soils formed in silty eolian or glaciolacustrine deposits. Mean annual precipitation ranges from 26 to 50 inches and the mean annual temperature ranges from 45 to 52 degrees Fahrenheit. The frost free season ranges from 105 to 180 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Biddeford: Strong lead
- Buxton: Strong lead
- Lamoine: Strong lead
- Scantic: Strong lead
- Suffield: Strong lead
- Lyman: Weak indication
- Peru: Weak indication
- Adams: Weak indication
See it on the map
Open a Hartland spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Hartland very fine sandy loam, 6 to 12 percent slopes, map unit HlC in Chittenden County, Vermont.
- Official Series Description: Hartland(revised 07/2025), established.
- Taxonomic class: Coarse-silty, mixed, active, mesic Dystric Eutrudepts
- Rated with rule version 2026-09-28.1; the method is on the About page.