Glenville soil
Wild-clay potential
Possible
Possible: a clay-enriched layer typically about 30 to 40 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Glenville soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Glenville spot on the map
Rated from the USDA soil survey record for Glenville silt loam, somewhat poorly drained, 0 to 3 percent slopes (Harford County Area, Maryland) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 19% clay. It may need settling or refining to become a clay body.
- Note USDA labels this a "Btx" horizon: a subsoil layer where clay has accumulated.
- Note Moderate engineering plasticity index (11).
- Note The official series description calls the wet soil slightly sticky and slightly plastic.
- Note Moderate thickness (about 10 in (26 cm)).
- Note Typically starts about 30 in (76 cm) down; expect real digging or look for cuts and banks.
- Note Few rock fragments (about 2% by volume).
Layer by layer
- TopsoilAp A silt loam layer about 0 to 11 in down: about 15% clay, moderate plasticity when wet, dark yellowish brown when moist. Weak indication
- Clay subsoilBt1 A channery silt loam layer about 11 to 20 in down: about 23% clay, moderate plasticity when wet, yellowish brown when moist. Weak indication
- Clay subsoilBt2 A silt loam layer about 20 to 30 in down: about 24% clay, moderate plasticity when wet, yellowish brown when moist. Possible
- Clay subsoilBtxbest layer A silt loam layer about 30 to 40 in down: about 19% clay, moderate plasticity when wet, brown when moist. Possible
- Loamy layerC1 A loam layer about 40 to 59 in down: about 18% clay, moderate plasticity when wet, yellowish brown when moist. Weak indication
- Loamy layerC2 A loam layer about 59 to 80 in down: about 18% clay, moderate plasticity when wet, yellowish brown when moist. Weak indication
What it looks like raw
The clay subsoil (Btx), 30 to 40 in down in the typical profile: brown (10YR 5/3); silt loam; very firm, brittle, slightly sticky, slightly plastic. Raw colour is not fired colour.
About the soil
- Parent material: schist, gneiss or phyllite colluvium derived from metamorphic rock over schist, gneiss or phyllite residuum weathered from metamorphic rock.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: somewhat poorly drained.
Where it is mapped
Seen on the map as the most common soil in 27 map units in Delaware, Maryland, Pennsylvania, Virginia, in these survey areas: Berks County, Pennsylvania; Chester County, Pennsylvania; Delaware County, Pennsylvania; Harford County Area, Maryland; Lancaster County, Pennsylvania; Lehigh County, Pennsylvania; Montgomery County, Pennsylvania; Philadelphia County, Pennsylvania; Prince William County, Virginia; York County, Pennsylvania; and 3 more.
By state: wild clay in Delaware,wild clay in Maryland,wild clay in Pennsylvania,wild clay in Virginia.
USDA, distribution and extent: MLRA 148 Northern Piedmont. Southeastern Pennsylvania, Delaware, Maryland, New Jersey, and northern Virginia. The series is extensive.
USDA, geographic setting: The Glenville soils are nearly level to strongly sloping soils on upland flats, footslopes or near the heads of drainageways. Slopes range from 0 to 15 percent. The Glenville soils have developed in residuum or colluvium affected by soil creep that is weathered from phyllite, micaceous schist, gneiss and other acid crystalline rocks. The climate is temperate and humid with average annual temperature of 48 degrees to 57 degrees F, and average annual precipitation of about 40 to 50 inches. The growing season ranges from about 160 to 200 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Watchung: Strong lead
- Montalto: Strong lead
- Christiana: Strong lead
- Hagerstown: Strong lead
- Jackland: Strong lead
- Talleyville: Strong lead
- Aden: Strong lead
- Albano: Strong lead
See it on the map
Open a Glenville spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Glenville silt loam, somewhat poorly drained, 0 to 3 percent slopes, map unit GnA in Harford County Area, Maryland.
- Official Series Description: Glenville(revised 04/2021), established.
- Taxonomic class: Fine-loamy, mixed, active, mesic Aquic Fragiudults
- Rated with rule version 2026-09-28.1; the method is on the About page.