Ceresco soil
Wild-clay potential
Weak indication
Weak indication: no layer of Ceresco shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Ceresco soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Ceresco spot on the map
Rated from the USDA soil survey record for Ceresco loam, 0 to 2 percent slopes, occasionally flooded (Pike County, Illinois) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Too little clay to be a clay body on its own: about 15% clay.
- Note Moderate engineering plasticity index (7).
- Note Thick enough to investigate (about 28 in (71 cm)).
- Note Typically starts within about 14 in (36 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- Sandy layerH1 A loam layer about 0 to 14 in down: about 14% clay, moderate plasticity when wet, brown when moist. Weak indication
- Sandy layerH2best layer A sandy loam layer about 14 to 42 in down: about 15% clay, moderate plasticity when wet, gray when moist. Weak indication
- Sandy layerH3 A fine sandy loam layer about 42 to 60 in down: about 10% clay, moderate plasticity when wet, gray when moist. Weak indication
What it looks like raw
The sandy layer (H2), 14 to 42 in down in the typical profile: gray (10YR 5/1); friable. Raw colour is not fired colour.
About the soil
- USDA family mineralogy: mixed.
- USDA family particle-size class: coarse-loamy.
- Drainage: somewhat poorly drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Illinois, in these survey areas: Pike County, Illinois.
By state: wild clay in Illinois.
USDA, distribution and extent: MLRAs 97, 98, 99, 105, 111D, 115C in southern Michigan, northwestern Ohio, southwestern Wisconsin, southeastern Minnesota, and northern Indiana. The series is of moderate extent.
USDA, geographic setting: The Ceresco soils are on nearly level flood plains at elevations slightly above the first bottom land in large flood plains or on first bottom positions on smaller streams in river valleys. Slope ranges from 0 to 3 percent. These soils formed in loamy alluvium. Mean annual precipitation ranges from 737 to 1,092 mm (29 to 43 inches). Mean annual air temperature ranges from 6 to 13 degrees C (42 to 56 degrees F). Frost-free period is 145 to 220 days. Elevation is 130 to 400 meters (427 to 1,312 feet) above mean sea level.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Darwin: Strong lead
- Elco: Strong lead
- Ipava: Strong lead
- Keswick: Strong lead
- Titus: Strong lead
- Ambraw: Promising
- Baylis: Promising
- Beaucoup: Promising
See it on the map
Open a Ceresco spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 95%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Ceresco loam, 0 to 2 percent slopes, occasionally flooded, map unit 8395A in Pike County, Illinois.
- Official Series Description: Ceresco(revised 11/2021), established.
- Taxonomic class: Coarse-loamy, mixed, superactive, mesic Fluvaquentic Hapludolls
- Rated with rule version 2026-09-28.1; the method is on the About page.