Broadax soil
Wild-clay potential
Possible
Possible: a clay-enriched layer typically about 37 to 65 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Broadax soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Broadax spot on the map
Rated from the USDA soil survey record for Broadax silt loam, 2 to 8 percent slopes (Lewis and Nez Perce Counties, Idaho) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 20% clay. It may need settling or refining to become a clay body.
- Note USDA labels this a "Btkb" horizon: a subsoil layer where clay has accumulated.
- Note Moderate engineering plasticity index (14).
- Note Thick enough to investigate (about 28 in (71 cm)).
- Note Typically starts about 37 in (94 cm) down; expect real digging or look for cuts and banks.
- Missing data Rock fragment content is not reported.
- Note USDA reports about 10% calcium carbonate; lime in a clay body deserves testing.
Layer by layer
- TopsoilA A silt loam layer about 0 to 16 in down: about 21% clay, moderate plasticity when wet, yellowish brown when moist. Weak indication
- Clay subsoilBt A silt loam layer about 16 to 33 in down: about 27% clay, moderate plasticity when wet, yellowish brown when moist. Possible
- Loamy layerBC A silt loam layer about 33 to 37 in down: about 22% clay, moderate plasticity when wet, pale brown when moist. Weak indication
- Clay subsoilBtkbbest layer A silt loam layer about 37 to 65 in down: about 20% clay, moderate plasticity when wet, brown when moist. Possible
What it looks like raw
The clay subsoil (Btkb), 37 to 65 in down in the typical profile: brown (10YR 5/3), brown (10YR 4/3) moist. Raw colour is not fired colour.
About the soil
- Parent material: loess.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-silty.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 4 map units in Idaho, in these survey areas: Lewis and Nez Perce Counties, Idaho.
By state: wild clay in Idaho.
USDA, distribution and extent: Eastern Washington and northern Idaho. MLRA 8. The series is of moderate extent.
USDA, geographic setting: Broadax soils are on hillslopes and plateaus at elevations of 800 to 3,500 feet. Slopes are 0 to 40 percent. The soils formed in old loess mixed with recent loess in the upper part. Summers are hot and dry and winters are cool and moist. The mean annual precipitation is dominantly 15 to 18 inches: the low precipitation phase ranges to 12 to 16 inches; some areas in eastern Washington and Idaho range to 20 inches. The average July temperature is 69 degrees F. and the average January temperature is 27 degrees F. The mean annual temperature is 46 to 50 degrees F. The frost-free season is 105 to 170 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Cramont: Strong lead
- Taney: Strong lead
- Caldwell: Promising
- Latahco: Promising
- Naff: Promising
- Slickpoo: Promising
- Thatuna: Promising
- Almota: Possible
See it on the map
Open a Broadax spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Broadax silt loam, 2 to 8 percent slopes, map unit 14 in Lewis and Nez Perce Counties, Idaho.
- Official Series Description: Broadax(revised 09/2009), established.
- Taxonomic class: Fine-silty, mixed, superactive, mesic Calcic Argixerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.