Brady soil
Wild-clay potential
Weak indication
Weak indication: no layer of Brady shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Brady soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Brady sandy loam (Kosciusko County, Indiana) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Too little clay to be a clay body on its own: about 15% clay.
- Note USDA labels this a "Bt" horizon: a subsoil layer where clay has accumulated.
- Note Moderate engineering plasticity index (7.5).
- Note Thick enough to investigate (about 28 in (71 cm)).
- Note Typically starts within about 9 in (23 cm) of the surface.
- Note Few rock fragments (about 10% by volume).
Layer by layer
- TopsoilAp A sandy loam layer about 0 to 9 in down: about 9% clay, low plasticity when wet. Weak indication
- Clay subsoilBtbest layer A sandy loam layer about 9 to 37 in down: about 15% clay, moderate plasticity when wet, dark yellowish brown when moist. Weak indication
- Sandy layerBC A loamy sand layer about 37 to 56 in down: about 7% clay, low plasticity when wet, brown when moist. Weak indication
- Sandy layer2C A gravelly sand layer about 56 to 80 in down: about 2% clay, low plasticity when wet, brown when moist. Weak indication
What it looks like raw
The clay subsoil (Bt), 9 to 37 in down in the typical profile: dark yellowish brown (10YR 4/4); sandy loam; friable. Raw colour is not fired colour.
About the soil
- Parent material: loamy outwash over sandy and gravelly outwash.
- USDA family mineralogy: mixed.
- USDA family particle-size class: coarse-loamy.
- Drainage: somewhat poorly drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Indiana, in these survey areas: Kosciusko County, Indiana.
By state: wild clay in Indiana.
USDA, distribution and extent: MLRAs 97, 98, 99, 104, 105, 108C, 110, 111B, 111C in southern Michigan, northern Indiana, northwestern Ohio, and eastern Iowa. The series is of large extent.
USDA, geographic setting: Brady soils are on outwash plains, valley trains, terraces, and lake plains. Slope gradients are dominantly 0 to 2 percent and range from 0 to 6 percent. Brady soils formed in loamy outwash materials. Mean annual temperature ranges from 8.9 to 11.7 degrees C (48 to 53 degrees F). Mean annual precipitation ranges from 762 to 1067 mm (30 to 42 inches). Frost-free period is 130 to 180 days. Elevation is 177 to 466 meters (580 feet to 1,530 feet) above mean sea level.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Del Rey: Strong lead
- Saranac: Strong lead
- Toledo: Strong lead
- Aubbeenaubbee: Promising
- Crosier: Promising
- Metea: Promising
- Miami: Promising
- Rensselaer: Promising
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Brady sandy loam, map unit Bp in Kosciusko County, Indiana.
- Official Series Description: Brady(revised 08/2012), established.
- Taxonomic class: Coarse-loamy, mixed, active, mesic Aquollic Hapludalfs
- Rated with rule version 2026-09-28.1; the method is on the About page.