Crosier soil
Wild-clay potential
Promising
Promising: a clay-enriched layer typically about 11 to 30 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Crosier soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Crosier spot on the map
Rated from the USDA soil survey record for Crosier loam, 0 to 1 percent slopes (Kosciusko County, Indiana) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 28% clay in the fine-earth portion.
- Note USDA labels this a "Btg" horizon: a subsoil layer where clay has accumulated.
- Raises the potential High engineering plasticity index (21): USDA's estimate suggests plastic behavior when wet.
- Note Thick enough to investigate (about 19 in (48 cm)).
- Note Typically starts within about 11 in (28 cm) of the surface.
- Note Few rock fragments (about 7% by volume).
Layer by layer
- TopsoilAp A loam layer about 0 to 11 in down: about 15% clay, moderate plasticity when wet, dark grayish brown when moist. Weak indication
- Clay subsoilBtgbest layer A clay loam layer about 11 to 30 in down: about 28% clay, high plasticity when wet, grayish brown when moist. Promising
- Sandy layerBC A loam layer about 30 to 38 in down: about 15% clay, moderate plasticity when wet, brown when moist. Weak indication
- Sandy layerCd A loam layer about 38 to 80 in down: about 15% clay, moderate plasticity when wet, brown when moist. Weak indication
What it looks like raw
The clay subsoil (Btg), 11 to 30 in down in the typical profile: grayish brown (10YR 5/2); clay loam; firm. Raw colour is not fired colour.
About the soil
- Parent material: loamy till.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: somewhat poorly drained.
Where it is mapped
Seen on the map as the most common soil in 2 map units in Indiana, in these survey areas: Kosciusko County, Indiana.
By state: wild clay in Indiana.
USDA, distribution and extent: MLRAs 97, 98, 111B, 111C, and 111D in Indiana and Michigan. The series is of large extent.
USDA, geographic setting: Crosier soils are on swells on till plains and moraines of Wisconsinan age. Slope ranges from 0 to 4 percent. Crosier soils formed in loamy till. Mean annual precipitation ranges from 864 to 1067 mm (34 to 42 inches). Mean annual temperature ranges from 8.3 to 11.7 degrees C (47 to 53 degrees F). Frost-free period is 140 to 185 days. Elevation is 183 to 466 meters (600 feet to 1,530 feet) above mean sea level.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Del Rey: Strong lead
- Saranac: Strong lead
- Toledo: Strong lead
- Aubbeenaubbee: Promising
- Metea: Promising
- Miami: Promising
- Rensselaer: Promising
- Washtenaw: Promising
See it on the map
Open a Crosier spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Crosier loam, 0 to 1 percent slopes, map unit CrA in Kosciusko County, Indiana.
- Official Series Description: Crosier(revised 11/2021), established.
- Taxonomic class: Fine-loamy, mixed, active, mesic Aeric Epiaqualfs
- Rated with rule version 2026-09-28.1; the method is on the About page.