Birdow soil
Wild-clay potential
Possible
Possible: a loamy layer with some clay typically about 28 to 60 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Birdow soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Birdow loam, 1 to 4 percent slopes (Tooele Area, Utah - Tooele County and Parts of Box Elder, Davis and Juab Counties) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 23% clay. It may need settling or refining to become a clay body.
- Note Moderate engineering plasticity index (7.5).
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 32 in (81 cm)).
- Note Typically starts about 28 in (71 cm) down; expect real digging or look for cuts and banks.
- Note Few rock fragments (about 3% by volume).
- Note USDA reports about 9% calcium carbonate; lime in a clay body deserves testing.
Layer by layer
- Loamy layerH1 A loam layer about 0 to 10 in down: about 23% clay, moderate plasticity when wet, brown when moist. Weak indication
- Loamy layerH2 A loam layer about 10 to 28 in down: about 23% clay, moderate plasticity when wet, brown when moist. Possible
- Loamy layerH3best layer A loam layer about 28 to 60 in down: about 23% clay, moderate plasticity when wet, brown when moist. Possible
What it looks like raw
The loamy layer (H3), 28 to 60 in down in the typical profile: brown (10YR 5/3); very hard, friable, sticky and plastic. Raw colour is not fired colour.
About the soil
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Utah, in these survey areas: Tooele Area, Utah - Tooele County and Parts of Box Elder, Davis and Juab Counties.
By state: wild clay in Utah.
USDA, distribution and extent: Central and southwestern Utah. This series is moderately extensive. MLRA 28A.
USDA, geographic setting: The Birdow soils are on gently to moderately sloping alluvial fans or flood plains at elevations of 4,250 to 6,900 feet. They formed in alluvium from igneous and sedimentary rocks. The average annual precipitation is 12 to 16 inches. Mean annual air temperature is 45 to 48 degrees F. The freeze-free period is 90 to 130 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Logan: Promising
- Broad: Weak indication
- Dynal: Weak indication
- Kilburn: Weak indication
- Ridd: Weak indication
- Abbott: Strong lead(same state)
- Airport: Strong lead(same state)
- Ant Flat: Strong lead(same state)
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Birdow loam, 1 to 4 percent slopes, map unit 6 in Tooele Area, Utah - Tooele County and Parts of Box Elder, Davis and Juab Counties.
- Official Series Description: Birdow(revised 03/2003), established.
- Taxonomic class: Fine-loamy, mixed, superactive, mesic Cumulic Haploxerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.